What should I pay attention to when installing solid wood flooring?

The installation of solid wood flooring requires eight major attentions:

1. The ground should be flat and dry.

2. During construction, sprinkle insect-proof powder first, and then lay a layer of moisture-proof paper, and the moisture-proof paper should be stacked 20 cm with each other and coated with asphalt oil two to three times. Moisture-proof paper must be spread to 10 cm above the corner of the wall, especially in the dry northeast, northwest and some particularly dry areas, be sure to put moisture-proof mats or moisture-proof paper, do not put asphalt paper.

3. The keel of the bedding must be dry.

4. The thickness of plywood (thick plywood) is more than 9mm, and a layer of moisture-proof oiled paper is laid on the surface of the plywood, and the interfaces are stacked 20 cm on top of each other and 10 cm above the corner. (1) Nail the splint with a thickness of 9mm-l5mm, leave a gap of 20mm between the splint and the splint or cut the splint into 60X120mm, and be sure to nail it firmly on the cement floor. (2) Use the square wood that has been anti-corrosion, anti-moth and drying treatment, and the cement can not be placed next to the square wood.

5. In the humid East China, South China and some particularly humid areas, when installing the floor, do not lean too tightly between the floor and the floor, so as not to expand and deform the floor due to moisture in the wet season (between the floor and the floor, just enough to put down a packing box belt). In the northeast and northwest, it is best to have a natural connection between the floors.

6. The floor and the wall are separated from the reserved joints of more than 8mm. It is forbidden to apply any glue between the floor and the plywood, and the air nail (special nail for the floor) is driven diagonally, and the air pressure must be more than 6Kg.

7. After the floor is installed, pay attention to ventilation to avoid adverse reactions to the floor caused by long-term sealing.

8. Since the floor is a natural material, please strictly follow the above methods for construction and installation, and ask professional technical construction personnel for construction and installation. In the event of deformation or other problems caused by improper installation methods, the company has no responsibility for the damage.

The above is the warm answer to your questions by Ruicheng installation solid wood flooring experts.

Prevent uneven ground.

Uneven ground causes part of the floor and keel to hang in the air, making a noise when stepping on it.

Prevent the keel from not drying.

The moisture content of the undried wooden keel is usually about 25%, while the moisture content of the qualified wooden floor is generally 12%, and the humidity difference is too large to make the wooden floor absorb moisture quickly, resulting in the arching of the floor and the bursting of the paint surface. During construction, the floor is laid first, and then other construction is carried out on the floor. However, after the floor is laid, it often takes a month or more to polish and paint.

During this period, the floor is not isolated from the water vapor and chemicals in the surrounding environment, which is likely to cause the wooden floor to be deformed due to the rapid change in moisture content.

Prevent over-loose or over-tight assembly.

When laying the floor, the assembly tightness of the wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place where it is used. If it is too loose, the floor will shrink and there will be large gaps, and if it is too tight, the floor will arch when it expands.

Prevent the fixing method of using a wooden wedge and iron nails.

In the construction, the fixing method of beating the wooden wedge and adding the iron nail will cause the nail holding force to be insufficient because the contact surface between the wooden wedge and the iron nail is too small, and it is easy to cause the wooden keel to loosen, and there will be a sound when stepping on the floor.