-
Anonymous users2024-01-231. Before the installation of the wooden door, it must be placed horizontally on the ground (the stacking height should not exceed 1 meter), and do not lean to avoid deformation.
2. Try to avoid outdoor sunlight for a long time to prevent the wooden door from being heated.
3. Prevent the wooden door from being hit abnormally or in contact with corrosive substances.
4. Before installation, the door opening must be treated with the necessary moisture-proof and anti-corrosion.
After installation: 1. Under normal circumstances, the door leaf should be closed.
2. If the humidity and temperature difference between the environment on both sides of the door body is large, the door leaf should be kept open to avoid the deformation of the door body caused by uneven humidity and temperature on both sides.
3. During use, if the hinge, door lock, etc. are loose, they should be tightened immediately. When the hinge makes a sound when it is opened and closed, it is oiled.
4. When opening the door lock and turning the handle, please do not use too much force, so as not to reduce the service life of the lock due to improper use.
Things to pay attention to when installing wooden doors:
1. After measuring the water on the door, wipe it with a dry cloth immediately.
2. When there are stains on the façade, wipe it with a soft cloth. The use of professional wood product maintenance fluid can extend the service life of wooden doors.
3. Prepare tools: hammers, rulers, wooden (brick) blocks, ropes, pencils, Maxim door covers, special sturdy connectors, etc.
4. Remove the ash: Before installation, remove the old powder or lime at the place where the wooden bricks need to be installed, and leave the original brick wall or concrete wall.
5. Place the wooden bricks: coat the wooden bricks with special glue, pad the position of the sleeve board and the wall, and fix the wooden bricks and the sleeve board with small nails.
6. Install the door edge: After the styrofoam cures (generally 2-3 hours), remove the triangle on the sleeve board.
7. Bracket, after blanking the actual door edge line size, coat the sleeve groove with special glue, and then gently knock and fix the door edge line and door sleeve and plate. (If the door edge line and the groove fit loosely, you can use the inside of the door edge line to plug it with wooden veneer).
Set door, the later process of the wooden door factory processing is to brush the paint, the quality of the paint directly affects the final use of the wooden door, and the paint cost is also one of the largest parts of the cost of the wooden door. The types of paints are broadly divided into phenolic paints, nitro paints, alkyd paints, polyurethane paints, polyester paints and PU paints. Among them, phenolic paint and alkyd paint are basically eliminated in decoration due to the poor texture and adhesion of paint film, and a large number of nitro paints, polyester paints and PU paints are used. >>>More
1.First of all, the appearance should be liked, and the light should be observed whether the glaze on the inner and outer surfaces is bright, crystal smooth, whether there are ripple cracks, needle eye impurities, symmetrical appearance, and whether it is stable and not swinging on the ground. >>>More
Custom furniture can make full use of the space in the home, and can be completely designed according to the actual situation of the owner, both from the appearance and the use of can fully reflect the personalized needs, therefore, some large pieces of furniture such as wardrobes for customized processing, should be the trend. >>>More
1. Before installation, check whether the sewage pipeline is unobstructed and the installation ground is clean. >>>More
Who is the solid wood door installer
A: I am not a master who does the work, but my workers can install, do you have any problems? >>>More