-
Anonymous users2024-01-24Is the first radiator connected in parallel, you can monitor it like this, close the first radiator valve, and then wait a while to see if the radiator in the bedroom is hot, hopefully that helps.
-
Anonymous users2024-01-23For water circulation problems, check the pipeline, whether it is connected wrong.
-
Anonymous users2024-01-22The first heating estimate is too low for the radiators to be lower than the water level of the boiler.
-
Anonymous users2024-01-21You understand and ask, it's a matter of circulation.
The installation of radiators at home can be selected after the decoration is completed, and at the same time as the installation of water and electricity lines. The location of the radiator installation varies according to the room with different functions, and when determining the location of the radiator, it is necessary to consider both the problem of convection and the problem of heating cold air. >>>More
1. The valve is not opened.
If you encounter a radiator situation at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close. >>>More
You check that the valves of the water separator and water return are fully open. In the past, it could be hot.
Remember, do not put water on the radiator, the small valve of the radiator is used to reduce pressure, you can test the radiator by hand, whether there is a significant difference in temperature between the upper and lower parts, if there is a decompression, increase water circulation, it will be fine. If you have a top floor, you can install a circulating pump to improve the poor circulation, if it is not on the top floor, do not use it that will affect others.
There is a place for the heating pipe to hold air.
The gas in the pipe is discharged and it will heat up immediately >>>More