Is parquet easy to scratch?

The reinforced one is not easy to scratch The reinforced surface has a layer of aluminum oxide, which is very wear-resistant, and the solid wood composite is also very wear-resistant, as long as there are no sharp objects, it is not easy to scratch.

That is, multi-layer composite, it is softer than the fiber compression composite bottom, easy to produce scratches under pressure, everything depends on the quality and wear resistance of the surface layer!

Multilayer solid wood and solid wood flooring are tested differently than laminate flooring. The quality of the paint surface of multi-layer solid wood is measured by the loss of paint film, that is, with a grinding wheel of 180 meshes, the load of 500g is relative friction with the surface of the paint film, and the national standard paint film loss is , so when you buy, you can place the floor board obliquely in the bright place, and observe whether its paint film is uniform and plump from the end face of the board, whether there is a wavy indentation, etc. The surface paint of high-quality parquet is relatively uniform.

If you have scratches during use, it is possible that you have been accidentally scratched by other sharp objects during use, or the paint film of the floor itself is not done properly? If that's the case, you'll want to look for the manufacturer. In addition, here are some ways to deal with scratches:

1. If the paint film on the surface of the floor is not broken, just a little impression, after cleaning, it can be directly polished with polishing wax. If the floor paint film is damaged or exposed, you can use No. 400 water sandpaper dipped in soapy water to polish, then wipe clean, wait to dry, carry out local color supplement, after the color is dry, then brush a paint, dry for 24 hours, polish with No. 400 water sandpaper, and then wipe the wax for polishing. 2. The depth of the scratch is different, and the method of repair is also different.

The best thing to solve is a very shallow scratch, which can be solved by rubbing with No. 0 metal cotton dipped in oil. Deep scratches (extremely soft metal cotton yarn, no scratches) need to be repaired by professionals. The usual method is to enlarge the scratch to a suitable width, fill the putty, and then touch up the paint.