-
Anonymous users2024-01-24The aluminum alloy frame has been installed by the master, I think it should be firm, and there is a simplest and most practical way for waterproofing.
For the sake of beauty, use a paper knife to cut the foaming agent into the same flat as the aluminum alloy, if you can concave down 5 mm, the effect is better, and then buy a glass sealant, the sealant has a variety of colors to choose from, apply the sealant on the foaming agent, pay attention to the corners must be coated tightly, if you don't worry about the appearance, it is best to paint a thicker, and when the sealant dries, it will be absolutely waterproof, I hope it can help you.
-
Anonymous users2024-01-23I recommend using a waterproof material that is commonly known as waterproof, after all, there is also a need to consider future leaks.
If the gap is small, it can be filled with water-based transparent putty and wood chips; You can also fill in the thin strips of wood first, and then make up for it with water-based putty and wood chips. However, it must be water-based transparent putty, one is environmentally friendly but there is no color difference, otherwise one by one will affect the overall beauty of the floor. >>>More
Seal it with white cement.
I add foam, I think if you use cement, one is to shrink after wiping the general cement to maintain health, at this time there will be gaps, one is that the cement will crack or fall off once it is a little shaken or bumped. That's why I chose it this way.
It is best to use dark colors for glass glue.
1. The size of the balcony has been enlarged, and if you want to remedy it, you can do it again.