Excuse me, the one who knows how to make a toilet for waterproofing the house .

Waterproof paint is generally used for the interior of the toilet.

1 all the general ground to do 1-2 mm thick, the wall according to the national standard is to do meters, if the other side of the wall is the bedroom or living room and other important places, it is best to do the waterproof to the top, because the bathroom moisture is very heavy, easy to penetrate the wall to destroy the wall finish on the other side, it is recommended to use (the United States) Elokt waterproof material, cost-effective, the material is completely environmentally friendly, is your best choice for fine decoration, generally brush the material 3 times, do a good job of drying and solidifying the closed water experiment, no leakage, It can be directly pasted with ceramic tiles, which can be guaranteed for more than 10 years, and if it is added as a protective layer, it can generally be the same life as the building.

1. All bathrooms are waterproof, and the surrounding walls need to ensure that the height of the painting is not less than 80 cm; If there is a shower, the height of the waterproof paint should not be less than 200 cm when installing the shower faucet and the adjacent wall, and it is best to do the whole wall. (It is best to make the four walls of the bathroom waterproof as a whole). It's the high cost. >>>More

1. Since the waterproof layer is not exposed on the surface, when doing waterproofing, you must first find the previous waterproof layer. >>>More

Yes, you don't need to plan, it will work very well. Fill the hole with some good waterproof paint, the junction of the old and new ground, post a little cloth, good JS waterproof paint is elastic, but remember to wait for the base layer to dry after painting, I hope it can help you.