-
Anonymous users2024-01-24Method 1:
Press the one that comes out of the water and connect the lid inside the toilet tank to see if this one is broken, if it is fine.
There is no water in the tank, that is, the water stop valve is broken, that is more troublesome, open the toilet to see if the water stop valve is stuck, you can use your hand to dial it to see if it can.
If it still doesn't work, or if you can leave with your hands, then you need to change the water stop valve.
The easiest way is to find a maintenance master.
Method 2: Pick up the lid of the water tank and you can see that there is a cable at the lower part of the button, which is the connection between the button and the drain of the toilet tank.
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
Press the one that comes out of the water and connect the lid inside the toilet tank to see if this one is broken, if it is fine. >>>More
Some are reclaimed water or groundwater, which is different from the water used for washing and cooking, and it is time to recharge the card. Either check the toilet again to see if there is a problem with the inlet and outlet valves.
Replace it with a new one, and this crack will quickly extend when exposed to water until the entire toilet cracks. Imagine if you were using the toilet at this time, the consequences would be unimaginable. In the future, you must be careful when buying a toilet for inspection.
There is less water or the small openings around it are blocked. >>>More