-
Anonymous users2024-01-24Check the screws first, see if there is a high screwdriver to screw it in (so that it is smooth), then each screw is coated with anti-rust paint, and then the gypsum board is connected with Lafarge (available in paint stores, stirred into a paste with glue), and then paste a special seam tape with white glue on the outside after Lafarge is dry. OK
First, the overall shape.
Gypsum board slit ceiling is a problem often encountered when decorating, many people appreciate this decoration method, because the renderings after decoration are particularly perfect, can make the room look very exquisite, we should also pay attention to a lot of things when doing this decoration task, such as its overall shape, because gypsum board slit is not just a single performance, it can be presented in front of people's eyes in a variety of ways, such as diamond, which is the most classic one, in addition to we can also find the design of vertical rows and horizontal strips. >>>More
1. Prevent water vapor infiltration and oil smoke from scattering, so as to make it clean. such as suspended ceilings in bathrooms and kitchens. >>>More
1. Clean up the base layer.
2. The density of light steel keel frame or 3*4 wooden keel frame (for fire treatment) is not more than 600*600 >>>More
Summary. Ceiling should be made of a layer of base layer first, this base layer can be made of gypsum board, and then make this (modeling) effect on this base layer. >>>More
1. Draw two inscribed circles first, and then draw two circles that are twice larger than the previous circle for inward incision. The excess is erased and painted with appropriate modifications. Draw it and cut it off on drywall and you're done. >>>More