-
1. Clean up the base layer.
2. The density of light steel keel frame or 3*4 wooden keel frame (for fire treatment) is not more than 600*600
3, the selection of gypsum board cover, self-tapping nail fixing, nail eye anti-embroidery paint 4, gypsum board surface seams with cloth special cloth strips and plaster treatment flat, scrape two to three times putty (leveling) polishing smooth.
The main tools include: chainsaws, toothless saws, nail guns, hand saws, hand planers, pliers, screwdrivers, movers, square rulers, steel rulers, steel levels, etc. >>>More
The budget for the home improvement gypsum board ceiling is generally calculated according to the area of how much is a square, if the modeling roof is calculated according to the item after reviewing the cost. When making the ceiling, the wooden keel of the wire curtain is made with the wooden square, which is suitable for the thick ceiling and the wire curtain box is embedded; >>>More
Follow these steps to achieve good results:
1. There are gaps in the gypsum board (board) to be caulked. It is recommended to use the carcot for caulking, and then paste the seam tape (the master understands). >>>More
Laying direction, fixed transversely and longitudinally.
The strength performance and deformation of gypsum board are determined according to the direction, and the longitudinal performance of the board is superior to the transverse, so the longitudinal part of the gypsum board is not allowed to be parallel to the covered keel when the ceiling is suspended, and it should be perpendicular to the keel, which is an important measure to prevent deformation and cracking of joints. >>>More
Gypsum board modeling ceiling yellowing, to figure out the cause of yellowing, so as to be targeted: >>>More