How to make a diamond shaped gypsum board ceiling?

Summary. Ceiling should be made of a layer of base layer first, this base layer can be made of gypsum board, and then make this (modeling) effect on this base layer.

And this kind of "shape" can not be called "prismatic", it should be called 45 ° splicing ceiling, the production method is not complicated: after the base layer is done, measure the same size point from one corner of this ceiling to both sides, and play it with ink lines.

The location of this point should be calculated in advance according to the width of the walkway, and the diagonal size of each square gypsum board should be calculated in advance, so that this size reaches exactly on both sides of the width of the ceiling.

For example, if the width of the walkway is meters, and the average is divided into three square pieces of gypsum board, then the diagonal of each board is about 50 centimeters, so that the side length of the square board is about centimeters.

This step can be done in advance by staking out the scale on the board - this is the basic step in making this kind of ceiling, and there is no ready-made formula to apply.

How to make a diamond-shaped gypsum board ceiling?

Ceiling should be made of a layer of base layer first, this base layer can be made of gypsum board, and then make this (modeling) effect on this base layer. 2 5 And this kind of "modeling" can not be called "prismatic", it should be called 45 ° splicing ceiling, the method of production is not complicated: after the base layer is done, measure the point of the same ruler from one corner of this ceiling to both sides, and play it with ink lines.

3 5 The position of this point should be calculated in advance according to the width of the walkway, and the diagonal size of each square buried gypsum board should be calculated in advance, so that this size should reach both sides of the width of the ceiling. 4 5 For example, if the width of the walkway is meters, and the average is divided into three square plasterboards, then the diagonal of each board is about 50 centimeters, so that the side length of this square board is about centimeters. 5 5 This step of the work can be pre-made on the board to reduce the scale of the stakeout - this is the basic step of making this kind of ceiling, it does not have a ready-made formula to apply.

I hope mine can help you.

Have a great day! 

How wide and long to make shaped.

Is it all. Yes.

Kuanwa is the area of the whole person.

To do the shape of the full size.

Isn't this a little small?

The diamond shape is a parallelogram, which is more labor-intensive and material-intensive, and is generally not cut into the corresponding size, and then pasted one by one.

First do the layer of the base layer, the base layer is made of gypsum board, that is, the base layer is seeded (modeling), the effect of the modeling can be called prismatic, it should be called 45 ° splicing ceiling production and complex, the base layer is done after the ceiling angle to both sides of the same size point, and with the ink line elastic point position to calculate the angle line size of each gypsum board according to the width of the walkway in advance, to make the size reach both sides of the ceiling width.

As for how to divide it, there is no detailed size, I don't understand what you said. Can't mess with the design,,Answer the next question,After the gypsum board is modeled, use white latex to paste the caulking paper tape on the joints of the gypsum board gaps to prevent cracking at the joints in the future,After the overall batch of putty, after the putty is completed three times, the sandpaper polishes the surface and brushes the latex paint on both sides.

The diamond shape is parallelogram, it is more labor-intensive, the material is more labor-intensive, the straight-sided diamond is as simple as the boss said, as for the size, it is calculated according to the size of your ceiling, this kind of light paint is 2 times that of the flat top, I don't know if it is enough.