How to modify the misalignment of the bathroom masonry

This is sometimes architecturally and sometimes structurally in the general description of the drawings, and you can find it specifically, and if you can't find it, you can find it from the energy-saving calculation book.

Cut the bricks that are ready to be left behind the toilet without teeth, cut twice, be careful not to touch the bricks that are ready to be kept on the side, and leave 15 cm on one side is about the same. After cutting, the hammer head smashes the bricks in the middle of the joint, it is easy to smash off, clean up the cement attached to the wall, if the top is not to the top, start from the top and slowly pry down, pay attention, do not touch the tiles on the side to be left on the line, if the top is to the top, use a small hairpin at the bottom to slowly dig out the remaining bricks on both sides, pick a small crack on the line, take the hairpin to gently pry may affect the other bricks on the side, but it will not be very powerful, do not look carefully should not be able to see. >>>More

You can measure the size, find a wooden cabinet that can be made into furniture, and tell the size according to all the sizes. >>>More

Deduct. However, the re-elanging concrete beam can be calculated separately.

Hardcover rooms are generally all included, so there is no need to pay for additional working hours.