Calculate the toilet masonry deduction flap

Updated on Bathroom 2024-07-11
2 answers
  1. Anonymous users2024-01-24

    Deduct. However, the re-elanging concrete beam can be calculated separately.

  2. Anonymous users2024-01-23

    Of course, the flip edge is usually concrete.

Related questions
Which quota is set along the toilet turn
1 answers2024-07-11

You're talking about waterproofing, right? Set the façade waterproof layer, if the version does not have the façade waterproof, then set a ground waterproof. >>>More

Building toilet masonry
1 answers2024-07-11

This is sometimes architecturally and sometimes structurally in the general description of the drawings, and you can find it specifically, and if you can't find it, you can find it from the energy-saving calculation book.

Should the basin area be deducted from the calculation of the engineering quantity of the bathroom c
2 answers2024-07-11

This does not need to deduct the basin area, because this is how it is calculated in the actual settlement, and you also need to set a marble hole in it, and the specific price is according to the agreement. Or according to the actual price level.

Water seeps into the toilet along the floor
2 answers2024-07-11

If there is visible water, consider that there is a leakage source, as for the seepage next door, it should be that the bathroom waterproofing is not done, so you should find the master to check the leakage point, and then do the waterproofing at the same time. This cost depends on the local price, and the landlord can inquire about it. If you just fix it, you should be able to do it in a day or two.

Do you need steel bars for the upper clamor in the bathroom?
2 answers2024-07-11

There is no need for steel bars, and the upper beam of the bathroom is 150-200mm higher than the ground to prevent water backflow in the bathroom