-
Anonymous users2024-01-24Bathroom waterproofing can be made thick acrylic waterproof coating JS waterproof coating one-component polyurethane waterproof coating.
The bathroom floor is leveled first, the flooding slope of the leveling layer should be more than 2%, no local water accumulation, and the junction of the wall and the corner, the root of the pipe, are required to be wiped into a radius of 100mm uniform, smooth and smooth small fillet to use a special trowel. A 5% slope should be wiped at the root of all pipes against the wall to avoid water accumulation here.
The joints should be painted in place, the joints between the bathroom wall and the floor, and the joints between the water and water pipes and the ground.
In the general bathroom waterproofing treatment, the wall should also be made about 30 cm high waterproof coating, and the shower wall should be made meter high.
Painting waterproof layer: Taking the polymer composite cement-based waterproof coating as an example, Qinglong has a general-purpose JS waterproof coating and a flexible JS waterproof coating, which paints the paint twice, and crosses vertically before and after, with a single layer thickness, and the thickness of the two layers is not more than 2mm.
-
Anonymous users2024-01-23Bathroom waterproofing, common waterproof materials include mortar waterproofing agent, waterproof coating and waterproof membrane.
Because the bathroom itself is a relatively stable part of the house structure, coupled with a small area and many pipes, if the waterproof membrane is used, it is not only not easy to cut and paste, but also has high technical requirements for construction workers, so it is now widely used waterproof coating and mortar waterproofing agent.
It is recommended to use kitchen and bathroom waterproof slurry for bathroom waterproofing, because more than 80% of the bathroom leakage is concentrated in the yin and yang corners, pipes, sanitary ware, floor drains and other places, and the quick-setting repair mortar contained in it is developed for these places, and the use of key parts is also the first key parts of the repair and strengthening, and then the overall waterproof slurry is used to do the concept of waterproofing, the special material is more targeted, of course, the waterproof effect is better and more durable than the general waterproof and waterproof materials.
1.Reinforcement of the original waterproof layer of the bathroom and the first water test. >>>More
Bathroom waterproof partition practice.
1.Be sure to do wall waterproofing, before laying wall tiles, do a good job of wall waterproofing. Generally, the wall should be waterproof with a height of 30 cm, but for non-load-bearing light walls, the whole wall should be waterproofed, at least 60 cm high. >>>More
The rubber powder can be mixed with water for a long time, and after adding cement, it can only be used for 2-3 hours.
As long as it is a product that meets the national product standards and environmental protection standards, it can be used with confidence, especially the products of well-known brands such as JCDecaux and Sika.
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More