-
Anonymous users2024-01-24This shows that this waterproof coating is not well bonded, there is no waterproof effect, and it affects the appearance or quickly eradicate it, and make a little more waterproof coating again. It is recommended to choose the appropriate ratio when using Qinglong JS waterproof coating, and the adhesion to the roof waterproof should be strong enough, that is, the specific gravity of the waterproof liquid material should be more.
-
Anonymous users2024-01-23It is recommended that all the parts that fall off be removed and redone.
-
Anonymous users2024-01-22- The roof is not waterproof paint, it is a general scraping putty, for this case, you can shovel off and brush the putty again, and finally brush the latex paint (or not).
It can be customized stainless steel shower room and can also be roofed.
It doesn't have to be leaking, it could be the water pipe under the washbasin.
BATHROOM WATERPROOFING IS A VERY IMPORTANT PROCESS, THE HOUSE IN THE BUILDING HAS BEEN DONE BUILDING WATERPROOFING, THE WATERPROOF LAYER EXTENDS FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND ACCORDING TO THE CONVENTIONAL BATHROOM BY THE SHOWER HEAD WALL WATERPROOF LAYER HEIGHT SHALL NOT BE LESS THAN 1800MM, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, AND THE WATERPROOF PROJECT MUST BE DONE AFTER THE END OF THE 24-HOUR WATER STORAGE EXPERIMENT. >>>More
How to remove the shower roof spray steps:
1. Generally, the nozzle is installed in a section of the hose to confirm whether this is the case, 2. There is a screw at the interface, unscrew it down, you can remove the nozzle, 3. In general, the time is long, the screw is not easy to screw, it should be noted that you can't make a lot of effort and screw the screw head. >>>More
Must be shoveled clean!
You have to have the tools you need to be handy. >>>More