-
Anonymous users2024-01-24Simple shower room installation steps:
1. Prepare the necessary tools to use.
2. Install the basin: combine the parts of the basin, adjust the level of the basin, and ensure that there is no water accumulation in the basin and at the bottom of the basin. The hose expands and expands with distance, connecting the basin floor to the floor drain securely.
3. Test and protection: After installation, it is necessary to test the water to ensure that the water is unimpeded. Fourth, find the position and punch holes: use pencils and levels to determine the drilling position of the aluminum against the wall, and use a percussion drill to punch holes.
4. Install aluminum: knock in the rubber particles at the drilling hole, and lock the aluminum strip to the wall with screws.
5. Fix the glass: clamp the glass and lock it at the bottom basin borehole, and then fix it with screws.
6. Install the pipe jacking: find the corresponding orange and beard drill hole above the fixed glass, install the (straight mouth oblique mouth) fixing seat and connect the pipe jacking. It is fixed to the top of the glass with a bent sleeve.
7. Install the device shelf: Measure the position of the device shelf, tighten the shelf nut, fix the shelf glass, and keep it vertical and horizontal. Pay attention to waterproofing under the aluminum material that holds the glass in place.
8. Install the movable door: install the hardware of the movable door and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the shaft core of the lotus leaf until the door feels the best.
9. Do a good job of waterproofing: install suction strips or water-retaining adhesive strips on the side or under the glass as required. Use silicone to make tight joints between aluminum and the wall, glass and basin.
10. Debugging and fastening: check whether each part is comfortable and smooth, and adjust it in time if problems are found. After adjustment, tighten the corresponding screws to make the whole shower room more firm.
11. Finishing work: Insert the decorative aluminum strip into the aluminum material attached to the wall to ensure that its appearance is neat and generous. Finally, you need to wipe the entire shower room with a rag.
-
Anonymous users2024-01-231. Pay attention to the preparation before installation, the regular shower room manufacturer will send professionals to install it, and bring all the tools with you, which is faster and more convenient. The installation of the basin must be careful, and it is essential to test the water, if the house is installed, it is more difficult to make larger changes. Mul.
2. Install the basin: combine the parts of the basin, adjust the level of the basin, and ensure that there is no water accumulation in the basin and at the bottom of the basin. The hose expands and expands with distance, connecting the basin floor to the floor drain securely. Mul.
3. Test and protection: After installation, it is necessary to test the water to ensure that the water is unimpeded. Before the installation of the house, the installed basin should also be protected in time. Mul.
4. Room installation: whether the shower room is safe or not has an important relationship with whether the room is installed properly, whether the hole is accurate, whether the accessories are installed properly, and whether the waterproof seal is done well will affect the normal use of the product.
-
Anonymous users2024-01-22My advice is not to install it yourself, after all, you are not a professional. Generally, large shower room brands like Leiboton have their own installation team, as long as you buy their products, they will quickly come to help you install.
-
Anonymous users2024-01-21I am a professional shower room, installed for more than two years, simple are easy to install, the main first to level the ground slope, if it is arc, first turn the frame group, the fixed aluminum strip on the wall is fixed, and then installed, in the installation of glass, waterproof adhesive strips, if it is frameless, the hinge is installed on the glass, the water retaining stone is flat, and the glass should be vertically 、、、 up and down when installed
Is that okay?
I am a professional shower room, installed for more than two years, simple are easy to install, the main first to level the ground slope, if it is arc, first turn the frame group, the fixed aluminum strip on the wall is fixed, and then installed, in the installation of glass, waterproof adhesive strips, if it is frameless, the hinge is installed on the glass, the water retaining stone is flat, and the glass should be vertically 、、、 up and down when installed
Most of the simple shower rooms are made of tempered glass, the frame is aluminum alloy, and the bottom basin is made of acrylic composite materials or stone floors. The simple shower room has a simple structure, the bathing function is basically complete, except for the smart shower room designed with LED display handle, most shower rooms do not have more additional functions. However, compared with the overall shower room, the space is relatively independent and concise, with a strong sense of transparency, and does not block the overall tile paving effect of the bathroom. >>>More
Your problem is: the air inside the rubber pipe that is plugged into the kettle, to fill the kettle with water before the kettle, then turn on the sprinkler head, and finally turn on the water valve.
My house is now using Zhongshan Leiboton shower room, Zhongshan shower room, you will see them in the domestic home and Red Star Macalline. Big brands will have shower room stores, I bought it in July in Yuquanying's home Leiboton shower room store, it feels very good with it, and the service is good, so I recommend you to buy the Leiboton brand!
Before installing the shower room, the actual size of the installation space should be measured to confirm the location of the water and electricity pipes. When installing the product, first place the shower tray or marble strip, the bottom basin should be as close to the wall as possible during installation, adjust the level of the upper surface, put the water pipe into the drainage pipe on the ground, and pay attention not to bend; The installation of marble strips should be placed according to the installation size of the shower room. Then install the lower track of the rail-type shower room against the wall, pay attention to the vertical column and the wall, and the lower track should be lightly placed on the shower bottom tray. >>>More