-
If you're talking about a headbox chuck, the maximum is 500 chucks.
-
You can't put a chuck in the tailstock.
-
How do you put a chuck in the tailstock?
Both 6150 and C650 are dismantled from the back rocker. The mandrel is also pulled from the back.
The tailstock is basically marked on the Mohs scale, and you can know how many sizes it is by measuring the size.
Lathe tailstock adjustment chuck device: a bearing is installed between the hub core sleeve and the chuck hub sleeve, the adjusting chuck and the chuck hub sleeve are connected by chuck screws, the adjusting chuck is provided with a toggle pin, the hub core sleeve is provided with a hub root locking nut and a lock nail, and the chuck hub sleeve is provided with a locking screw and a pad.
There is a corresponding screw on each side of the bottom side of the tailstock. >>>More
The tailstock lead screw thread is severely worn.
The threads of the platen screw are worn. >>>More