How to resolve the door of the bathroom that has been renovated is facing the door of the bedroom

Updated on Bathroom 2024-08-09
6 answers
  1. Anonymous users2024-01-24

    Put a pot of tall greenery between the bathroom door and the bedroom door, and the door of my house is facing the bathroom, and that's how it is resolved.

  2. Anonymous users2024-01-23

    In this way, it's very simple, replace the toilet door with the same color pattern as the wall next to it, so that the toilet door is invisible, if there is space in front of the toilet door, put potted plants or hang some beaded curtains on the top to block the vision!

  3. Anonymous users2024-01-22

    If it is convenient, it is best to change the distance of the door for a few centimeters, I heard that the door to the door is not good, and it is believed that it is not credible.

  4. Anonymous users2024-01-21

    with a curtain. Close the door casually. If possible, and space permits, put a screen

  5. Anonymous users2024-01-20

    Put a mythical beast or something to ward off evil spirits.

  6. Anonymous users2024-01-19

    Send a picture to see if I can figure it out for you.

Related questions
4 answers2024-08-09

If it is slight, you can cut all the brick gaps (the former hook joints) with a blade, and then pour it in with a plugging agent, and if it is too serious, you can only dismantle it and start over.

1 answers2024-08-09

What is this, it's just a dream, who doesn't dream, don't be affected by a dream, it's too tiring to live.

2 answers2024-08-09

Bathroom waterproofing must be done before the decoration, if it has been decorated, you can only use waterproof paint to waterproof, but the effect is not so good, the specific steps are as follows: >>>More

1 answers2024-08-09

Make a sandwich of wood square (light steel) and paper-faced gypsum board on the wall filled with absorbent (insulation) cotton, and then use wallpaper and other decorative surfaces (of course, ordinary wall paint can also be used to treat the surface) to achieve sound insulation.

10 answers2024-08-09

1. First of all, clean the bathroom, use a mop to absorb the water, and then use a rag or paper towel to absorb the stagnant water in the cracks. >>>More