-
Anonymous users2024-01-241. Before paving, soak in water, and fill the soaked tiles with a batch of cement, which should be full.
2. Paste the bricks full of cement along the supporting plate on the wall and beat it with a rubber hammer.
3. After knocking it flat, take it down and see where there is a lack of pulp, and fill it up.
4. After filling the place that is not full, sprinkle plain cement (pure cement) and paste it on the wall again, paste it with high flat, and use eraser.
Hammer sturdy. 5. Because the cement always has to slide, after pasting, it must be filled with mortar again.
6. In order to paste the wall tiles (brick joints neatly) smoothly and regularly, in the process of pasting, it is necessary to insert toothpicks or thin iron nails.
brick joints, wait until the cement solidifies, and then take them out; The bricks will be firm and flat in this way.
Pay attention to the following points in the process of tiling:
1. The male angle of the tile is cut at a 45 degree angle.
2. The wall tiles must be pressed on the floor tiles, otherwise the gaps are not only ugly, but also troublesome to clean.
3. The regular tiling step is to paste the Qinqin wall bricks first, and the bottom row of the empty line is not pasted.
4. The middle column of the tiled wall is not allowed to appear non-whole bricks, and the appearance of non-whole bricks affects the overall collage effect.
-
Anonymous users2024-01-231. Before paving, soak in water, and fill the soaked tiles with a batch of cement, which should be full.
2. Paste the bricks full of cement along the supporting board on the wall, and beat them with a rubber hammer.
3. After knocking it flat, take the match high down, see where there is a lack of pulp, and fill it up.
4. After filling the place that is not full, sprinkle plain cement (pure cement), paste it on the wall again, paste it flat, and beat it firmly with a rubber hammer.
5. Because the cement always has to slide, after pasting, it must be filled with mortar again.
6. In order to paste the wall tiles (neat brick joints) and sell them out in a regular manner, in the process of pasting, you should use toothpicks or thin iron nails to insert the brick joints, and wait until the cement is solidified, and then take them out; The bricks will be firm and flat in this way.
Pay attention to the following points in the process of tiling:
1. The male angle of the tile is cut at a 45 degree angle.
2. The wall tiles must be pressed on the floor tiles, otherwise the gaps are not only ugly, but also troublesome to clean.
3. The regular bricking step is to paste the wall tiles first, and the bottom row of the empty is not pasted.
4. The middle column of the tiled wall is not allowed to appear non-whole bricks, and the appearance of non-whole bricks affects the overall collage effect.
-
Anonymous users2024-01-22The balcony wall tiles must be glued.
-
Anonymous users2024-01-21The most important thing is to find a good bricklayer, hehe.
For home decoration, the wall and floor tiles of the general balcony are mostly beige and light gray series, which feel more refreshing and can also use neutral colors, warm colors such as beige wood grain color, etc., not suitable for dark colors such as bright red dark brown, etc., because the light of the balcony is brighter, especially some balconies with better orientation, and the general balcony is a living room for rest and drying clothes, which needs a relaxed atmosphere, so it is best to use a lighter color for paving wall tiles on the balcony.
If the damage is not too large and you can accept it, you can use white cement to smooth it; If the damage is relatively large, then it can only be removed and re-pasted.
If you want to have a longer quality and better aesthetics, you can use beauty sewing.
1. Determine the height, size, and choose the paving method. >>>More
With wall tile grout, the place where the tile is sold is sold, it is not expensive, you can read the instructions yourself, and it is not troublesome.