-
Anonymous users2024-01-24If there are no screws, go up, take the board of the lampshade, there is a bulb inside, see if yours is LED, the LED should be changed as a whole, there is an interface. The bulb is simply turned down and replaced.
-
Anonymous users2024-01-23You are talking about the integrated ceiling, which should be repaired by the product seller or decoration company and the construction team, and if you disassemble it yourself, you need to insert a metal sheet into the gap to bring it out, and it is easy to damage it and cause deformation due to freehand operation; The lamp panel generally has a hook, and the finger can be put into the gap to make it fall off, and then disassemble the lamp to see where there is a problem
-
Anonymous users2024-01-22Look at what model, how many watts, go to the building materials market and buy one. Or someone who sells building materials can help you take a look at your home. The person who bought the lamp will install it for you.
-
Anonymous users2024-01-21Turn off the main switch! Then turn off the switch in your toilet too! Then unscrew the bulb! Get a new one! Then turn on the main gate and turn on the switch on your toilet!
-
Anonymous users2024-01-20Because the lights in the toilet are basically put together with our bath bomb, it is necessary to buy a special lamp when replacing it.
As long as this kind of lamp is sold in any hardware store, then we will open the lid of our bath bomb, and there will be 4 screws on its 4 corners, and then the bad lamp will be unscrewed, and then the good lamp will be installed, and then the cover on the bath bomb can be fastened.
This one uses a suction cup to suck the lampshade and take it off, and you can replace the lamp tube inside.
The kitchen is an area that we use very frequently in our daily life, and our three meals a day are solved here, so its decoration is particularly important. Kitchen lamps should be brighter, otherwise it will affect cooking. So how do you replace a broken kitchen light? >>>More
There is no need to disassemble the panel, pull down a little in the middle; Press and hold the spring pins on both sides to take them out.
Because the lights in the toilet are basically put together with our bath bomb, it is necessary to buy a special lamp when replacing it. As long as this good group lamp is sold in any hardware store, and then open the lid of our bath bomb, its 4 corners will be unscrewed or 4 screws of orange socks, and then the bad lamp is unscrewed, the good lamp is installed, and then the cover on the bath bomb can be buckled.
Use a professional suction cup to suck off the panel of the lighting module, and change the lamp tube! But you have to find a professional to do it! >>>More