-
Anonymous users2024-01-24Your household toilet may be jet siphon type, because the product structure of each manufacturer is different, I can't be sure whether the small hole in your toilet is blocked, if it can't be flushed, 1 may be the toilet when installing a shifter (a connector used when the toilet pit distance and the sewage pipe pit distance are not matched).
The installation of a shifter will affect the punch of the toilet, and there is also a possibility that the toilet itself is structurally problematic, and the previous toilet is much worse than the current one in terms of production process.
Although you have just bought a house and the economic pressure is quite great, but I still mind that you might as well change the toilet, the old toilet you use now is not water-saving, every time you use it will be very water-consuming, now the brand toilets sold on the market are water-saving, 3 6 liters of urine 3 liters of stool 6 liters and good momentum, it is recommended that you have time to go to the market to see, now the competition is very fierce, the price is very cheap when engaging in activities, about 500 800 can buy a very good toilet.
Think about it. The hose you mentioned is used to replenish the trap, and I guess it won't work now, hehe.
-
Anonymous users2024-01-23Complaint Wrigley.
Let someone else help solve it.
-
Anonymous users2024-01-22It should be the problem of the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, there is a curve in the middle, which is connected when the toilet is installed, whether it is blocked or the problem of the shifter, you need to disassemble the toilet, and it will be easy later...
-
Anonymous users2024-01-21Contact Wrigley's after-sales service to see if you can return the water parts.
Any flush toilet, 4-5 years of use will be fouled, the original smooth ceramic surface of the fouling, it seriously affects the drainage ability of the toilet, resulting in the inability to flush in time, slow drainage, which is usually caused in the process of use, generally the only longer way to appear this phenomenon is to replace the toilet, even if it is descaled in various ways, the toilet internal siphon elbow can not be completely removed, there is a temporary improvement, a little time will still appear such phenomenon.
The toilet is not able to pump water, which is a problem that every family encounters. So what is the reason for it? And how do we solve it? >>>More
The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.
Sometimes the flush of the toilet is low because your water pressure is not enough, and the quality of the toilet should not be a problem. If you feel that the water droplets are enough, but the flush of the toilet is not enough, you should ask the manufacturer when you bought it.
Causes and solutions for small toilet flushing:
1: The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although there is action. >>>More