-
Anonymous users2024-01-24My room type is 35 square meters, with a height of 8 meters, a length of 8 meters and a width of 8 meters, and there is a 3* meter bathroom on the right side of the door.
The meter span, the spacing of about one meter, and the 120mm high H-beam are all good levels as the support beam of the floor slab. But no matter how strong the structure is, it also depends on the load. The normal floor slab bears the self-weight of the floor slab of 300 kg per square meter, and the live load on the floor is 200 300 kg per square meter. >>>More
1. First of all, the bottom of the steel plate should be reinforced, and 40 angle steel and 300 spacing can be welded at the bottom to form a whole ground. >>>More
Yes, as long as the docking meets the requirements of equal strength.
Considering that the roof vibration ceiling can be just connected to the static wall as long as it is not connected, it is recommended to do modeling ceilings, aluminum plates, and aluminum hanging sheets. >>>More
1. Limits:
The deflection limit is 2L 250 L cantilever length, which is referred to the Code for the Design of Steel Structures. >>>More