-
Anonymous users2024-01-24If it is surface-mounted, there are adjusting screws on the bonnet to adjust the length of the middle wash time. If the valve body is buried, the bonnet should be removed, and the top of the valve core has an inner hexagonal hole to adjust the time.
The toilet foot-operated switch faucet comprises a pressure sensor, a switch control valve and a faucet, the switch control valve is provided with a pressure sensor, and the switch control valve is connected with the faucet. The innovation of faucet design is not to directly touch the dragon with your hands, which can avoid secondary pollution to your freshly washed hands.
-
Anonymous users2024-01-23There is a gong mother. There is a slotted gong wire mouth in the middle of the gong mother. You can adjust it with one word.
-
Anonymous users2024-01-22Adjustment method:
If surface-mounted, there are adjusting screws on the bonnet to adjust the length of flushing time.
If the valve body is buried, the bonnet should be removed, and there should be an inner hexagon hole at the top of the spool, which is time-adjusting.
Foot flush valvesFlushing equipment with a water tank for toilets, especially outlet valves for water tanks. The flush valve comprises a tank seat, a valve body, a movable shaft, and a cable, and is characterized in that: a water storage bucket with a top opening is installed in the upper part of the valve body.
Due to the installation of a water tank with an opening at the top in the upper part of the valve body, the water in the tank enters the water tank when the water level in the tank is high. An automatic flush valve is composed of a valve body, an automatic controller, an electric motor, a transmission wheel, a dial shaft, and a ceramic chip, which is characterized by an automatic controller controlling the motor, the motor is connected to the transmission wheel, the transmission wheel is connected to the dial shaft through the groove wheel, and the dial shaft is connected to the ceramic chip, so that the valve is opened and closed. It is characterized by automatic control, simple structure, fast flushing and tight closing.
Fecal foot pedal flush valve is a kind of flush valve, which is composed of a valve core, a valve shaft and a bracket, and is characterized by a valve core composed of a moving ceramic plate and a stator ceramic plate. The flush valve can be manually or electrically controlled. Due to the high hardness of the ceramic sheet, it is not easy to wear, not easy to age, and not easy to rust, so it is flexible to start, close tightly, and have a long service life.
Stool Foot Flush Valve This flush valve can be manually or electrically controlled. Due to the high hardness of the ceramic sheet, it is not easy to wear, not easy to age, and not easy to rust, so it is flexible to start, close tightly, and have a long service life.
Then you're using a squatting pit, right? The riser of the squatting pit is ten centimeters away from the wall, and the tap water pipe above is within the distance of the squatting pit surface "= 40.
change, the induction type is useless. It's no different from a new build.
The toilet foot-operated pressure bucket should in fact be able to be placed on the ground.
The flush valve of the squat toilet is generally located in front of or to the right side of the wall if it is a water tank type, and in the right front of the wall if it is pressurized, such as a foot pedal type.
This depends on the specific location and situation, the water tank must be fixed, if you don't make an eye on the tile, then you can only make a bracket or something fixed, as long as it can be fixed, it can be replaced!