-
Anonymous users2024-01-23Then you're using a squatting pit, right? The riser of the squatting pit is ten centimeters away from the wall, and the tap water pipe above is within the distance of the squatting pit surface "= 40.
-
Anonymous users2024-01-22The installation size of the water pipe, urgent! Please elaborate! Thank you
Bounty Points: 0 |14 days and 20 hours left until the end of the issue |Asked by: Anonymous.
There's something clogged with the foot valve, just remove it and clean it.
The water supply pipe using the flush valve is generally DN25, the minimum flush valve outlet is DN20, and the urinal outlet is DN15.
The water pressure is not enough. If there is a problem with the switch, find someone to change it.
How many floors of your house, where do you want to go to the bathroom water, planing the ground on the first floor, no need to do beams, high-rise words to do light wall without beams, high-rise squatting to go into the water to do the bottom of the floor squatting can be directly put without padding, do your own house on the floor to have a water inlet, to the distance between the sewer pipes to a slope, so that it is almost 400 high, but also depends on where you go into the water, you had better find a sewer, first connect the pipe, pay attention to be sure to keep the inlet, Otherwise, it will be disgusting.
When the upstairs bathroom is flushed, the pressure of the air in the pipe increases in a short period of time, causing the air flow to vortex, and the vibration that hits the pipe wall causes a very loud impact sound. >>>More