-
Anonymous users2024-01-24The water quality of the water supply pipes in the new house is generally a little worse, and there are more impurities. The spout filter can be cleaned regularly. Impurities can also appear at the interface between the hose connection and the wall.
Generally larger. (Here, it is common for the raw meal belt to become over-entangled and clog the water pipes.) Impurities will also appear on the bottom surface of the valve core of the faucet and the connecting surface of the faucet, and the faucet can be disassembled to take out the impurities.
The valve core of the dismantling faucet starts from the handle, and there is a red and blue mark under the handle, which is picked open with a knife, and a line or hexagonal gong wire can be seen inside. Pull out the handle upwards after unscrewing. Unscrew out the decorative cover.
Unscrew the hexagonal gong mother. Remove the spool. Can.
-
Anonymous users2024-01-23You should be using the tank when the water flow is small. Unload the tube and blow it into the tank, and the water will return to the tank, and the water will flow greatly.
-
Anonymous users2024-01-22It could be a faucet hose or an angle valve
Water quality and water pressure are exactly the same, they are two pipes separated from one main pipe, both from the main pipe.
The faucet in the kitchen at home has been used for a long time, and the water flow has become smaller.
There is an aerated device at the faucet spout, remove it and clean it up. There is also a pipe from the angle valve, just remove it and clean it up.
Such a leak can be repaired if the handle of the faucet can be disassembled, and it is a broken rubber pad inside.
Faucet leakage is a common problem, and many people will ignore this problem, but long-term faucet leakage can add up to a lot of waste and cause a lot of waste. Kitchen faucets are the most prone to water leakage because of their high frequency of use. >>>More