How to choose the dry and wet separation partition in the bathroom?

Now the bathroom is basically dry and wet separation, and the more common dry and wet separation is the glass partition, through the glass partition to distinguish the shower area from the wash basin, toilet and other areas, and when doing the glass partition of the shower room, there are actually several forms of glass partitions, many people do not know how to choose these kinds of glass partitions, and some people even do not know what types.

Let's introduce the design sister to you, and see which one is more suitable for your home!

1. Square partition.

The square partition has a square glass room like the one below, which is suitable for a relatively square bathroom with a small area;

For most ordinary families, the layout of the shower room is often made through the partition of the sliding door as in the latter cases on the basis of a small area;

2. Arc partition.

The arc-shaped sanitary partition is a more space-saving shower room, and at the same time, the arc-treated partition can avoid the space forming a sharp edge;

3. Diamond-shaped partition.

Considering the high cost of the arc-shaped glass partition and the sharp corner of the square, the diamond-shaped shower room made of three pieces of glass spliced together avoids the sharp corners and does not take up much space, so this shape is also a compromise choice.

Personally, I prefer a rectangular shower partition, how about you?

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.