What materials are used for the dry and wet separation partition in the bathroom

If the bathroom is too small, you can design the dry and wet separation of the washbasin outside, put the washbasin externally and place it outside the bathroom alone, and keep the toilet and shower room or bathtub in the bathroom, so that not only can the dry and wet partition be easily realized, but also because the washbasin position only occupies a small part of the common part, the aisle will not appear crowded.

The dark color wall tiles, with the white doors and sinks, look much higher quality and more advanced. In addition, moving the sink out of the bathroom will not disrupt our daily habits of using bathroom facilities, and even washing and squashing the toilet every morning will not conflict with each other, saving a lot of waiting time.

After all, the bathroom is a private space, and when the sink is placed outside, you may wish to add a partition wall design to block part of the view. The wall space is limited, so buy a mirror cabinet for the mirror, which saves space for two purposes! The background wall design of the round mirror, with brightly colored tiles mixed and matched puzzles, is really eye-catching!

Does the hostess want to put on makeup before going out? You might as well add a makeup mirror to the wall, and the space will be freed up, even if it is slow, it will not affect the male owner's use of the bathroom. The wall of the vanity area can be styled in the same way as the bathroom wall, and the mirror can be hung with eye-catching tiles.

The decoration style of the washbasin area and the bathroom is consistent, and the two seem to be separated, but they are closely connected in decoration! Low wall + partition, this partition looks good when the sink is outside

Hollow carving, delicate and elegant, white material and black wall meet and collide, the details show the high taste of the owner's home! The separation of dry and wet outside the wash basin greatly improves the efficiency of the toilet.

It should be emphasized that the dry and wet separation of the wash basin must pay attention to the storage problem, and take a moment to put it neatly after the things are used, otherwise there are many bottles and cans, and it is easy to look disorderly.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

The shower room of the bathroom we give a relaxed and casual expectation, can create a - their own private and comfortable space. However, in order for the bathroom to play its role better, it must be separated from dry and wet, so it is necessary to make a bathroom shower partition, so what is the best material for the bathroom shower partition? The most common practice on the market today is to use high-strength tempered glass.

Because the general shower room is wet, it may splash water when taking a bath, and it is difficult to wipe it dry in time, even if it is dry, the whole shower room is also a humid environment. Therefore, the partition material of the toilet should be selected to be moisture-proof and corrosion-resistant, which further prolongs the service life of the partition material.

The cost of cutting off the toilet is mainly tempered glass and white steel, these two products have strong corrosion resistance, and they are widely used, and they are also easy to clean, but the relative cost is high; In addition, plastic steel, gusset, the waterproof performance and corrosion resistance of this bathroom shower partition are also very good, and the cleaning is simple, but the service life is relatively short, and it can only be used for about 10 years. Both of these are more common bathroom shower partition materials.

The most popular toilet material is made of tempered glass insulation material, which is not only waterproof, easy to wipe dry, easy to clean, but also beautiful and generous, can have good permeability, and visually make the bathroom space larger. In addition, the safety factor of tempered glass is known to everyone and is relatively high. How much does tempered glass generally cost to make partitions?

Generally, it is about 150 yuan a meter, and there is a relatively high-grade laminated tempered glass on the market, which is a little more expensive, about 350 yuan a square meter, but in case of accidental breakage, the fragments are glued to the film in the middle.

Bathroom shower partition is a kind of decoration that many people will do in modern decoration, the choice of partition material used is also based on their own budget, family habits, house decoration style and their own preferences to actually decide, of course, the most common bathroom shower partition material is tempered glass, bathroom shower partition if handled well, can create a better comfortable life for you.

What materials are used for the separation of dry and wet in the bathroom.

1. Natural stone spacing.

Natural stone toilet partition material, solid structure, easy to stick and return to alkali yellowing. The texture is very good, if it is used on the door, it needs other materials to cooperate. The wholeness is slightly worse, the same as the artificial board, the cost is higher, it is suitable for wet environments, and the requirements for fire protection level are high.

2. Plastic spacer.

Bathroom partition plastic raw materials, waterproof, but not resistant to high temperature, scratch resistance, easy to deform and pollute. The edge is closed with plastic or aluminum, and there is no sense of wholeness. The appearance texture is not good, simple deformation, and the color selection is less, but the cost is low, the repair cost is low, and the screening is also faster.

It is suitable for relatively boring, normal temperature environment, and there is no fire rating request.

3. Composite board spacing.

Composite board bathroom partition data, also known as honeycomb board external splint and Melamine board, light weight, easy to moisture, degumming or corrosion. The edge is treated with aluminum or stainless steel edge strips, which is simple to deform and oxidize, and water vapor is easy to invade and expand and corrode. It has low cost, poor durability, fast repair and screening, suitable for relatively boring, normal temperature environment, and no fire rating request.

Individuals have personal preferences, and I can only briefly introduce the materials commonly used in sanitary partitions.

Toilet partition material 1: shower curtain.

Among all the bathroom partitions, this material is the cheapest and affordable, and energy-saving and environmentally friendly, the vast majority of people can accept it, this material can adjust the space atmosphere of the bathroom, there is a refreshing and transparent feeling, and the visual sense is very good, but this can not be completely waterproof, and you should pay attention to cleaning after use.

Sanitary partition material 2: plastic partition.

Bathroom plastic partition is also a good choice, this material is waterproof and affordable, that is, it is not resistant to high temperature and scratches, easy to deform and easy to pollute, the edge design has no sense of wholeness, and the color selectivity is very little, but the cost is very low, suitable for a relatively boring, normal temperature environment.

Sanitary partition material three: moisture-proof board.

Moisture-proof board, also known as melamine board, is to add a certain proportion of moisture-proof particles in the production process of the substrate, using multi-layer fiber materials, made of high temperature and high pressure, suitable for humid environment, one-time molding, excellent quality, is the best choice for bathroom partitions.

Sanitary partition material four: tempered glass.

Tempered glass is a kind of safety glass, the surface has compressive stress, can effectively improve its own bearing capacity, the use of this kind of glass can be very good waterproof, but also will have a sense of space, the price is also acceptable, it is a good choice.

Sanitary partition material five: natural stone partition.

Natural stone structure is solid, the texture is very good, can be effectively waterproof, but easy to stick and yellow, to cooperate with other materials, the integrity is poor, the cost is high, suitable for wet environment.

Sanitary partition material six: composite board spacing.

Composite board material is also known as honeycomb board, this material is lightweight, easy to be damp degumming or corrosion, the edge should be closed with stainless steel edge strips, the production process is simple, easy to deform and oxidize, its cost is very low, the durability is poor, suitable for relatively boring, room temperature environment.

Chengdu Yazhijie sanitary partition, personalized customized factory direct supply, high-end sanitary partition project, one-stop service.

In this case, the simple way is to use the kind of plastic plate of the bathroom ceiling to make a partition, which is just as easy to use and no problem.

It is very good to use glass as a partition, not afraid of water, relatively light weight, and simple construction.

As shown below: