How to waterproof the glass partition of the dry and wet separation in the bathroom

In the last issue, we introduced 4 methods of dry and wet separation in the bathroom, and today, we will mainly talk about what are the types of bathroom glass partitions? A square glass partition. This kind of toilet is suitable for a square, small bathroom, not only saves space, but it is also very flexible in terms of door opening and closing, and the price is slightly lower.

2. Slotted glass partition. Ideal for long and narrow bathrooms, the shower area occupies a wall or is in a corner. If it is a bathroom without windows, the partition will lead to poor ventilation and potential safety hazards when bathing.

3. Curved glass partitions. Similar to the square shape, it is suitable for small bathrooms, because there are no protruding edges and corners, so it will be safer for the elderly and children at home. However, the glass needs to be hot-bent, and the shape of the sliding door is complex, so the cost is much higher than the general shape.

4. Diamond-shaped glass partition. It is a form between a right angle and an arc, and is made up of three pieces of glass spliced together. Generally, it is installed at the angle of the sanitary ware and adopts the form of swing door, which can not only save space, but also ensure that the shower area has more space.

The above are the 4 types of bathroom glass partitions. Using glass partitions to separate dry and wet not only has a good effect, but also makes the whole space visually brighter.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

In fact, the glass partition of the bathroom dry and wet separation is also very easy to do waterproofing, it is recommended that you use Guoerjia waterproof coating, pure acrylic research and development, non-toxic and tasteless, more environmentally friendly, and then use reinforced polyester cloth construction when necessary. I hope it can help you, and I hope to adopt it!

Method:1The inside of the cabinet should be separated from the outside of the cabinet.

The waterproofing outside the cabinet is done, and the moisture prevention inside the cabinet cannot be ignored. There are many ways to design cabinet doors and drawers: such as installing magnets and other adsorption switches on cabinet doors, and automatic recovery springs for drawers, etc., to ensure that moisture does not enter through holes.

2.The bath cabinet is separated from the floor.

The lower edge of the bath cabinet should be off the ground, although this will cause some difficulty in installation, it is best to do so. Because in the bathroom, there will inevitably be water, this water may be formed by you to rinse the floor, and it is not excluded that there is an accidental leak, if the bath cabinet is separated from the ground, not only can the floor be cleaned without leaving dead corners, but also do not have to worry about the bath cabinet will be stained with water, which can be described as killing two birds with one stone.

Bathroom dry and wet separation decoration points:

The easiest way to separate wet and dry is to separate the bath, which reduces a lot of water diffusion. Generally speaking, we can set up the shower room in a corner, which will keep most of the bathroom area dry. If possible, it can also be distinguished on the ground.

When choosing materials for bathtubs, showers, etc., it is important to focus on water resistance, and materials that are comfortable can be used in places such as entrances. It can also be equipped with a glass partition or sliding door, which is beautiful, practical and economical.

The separation of dry and wet in the bathroom, so that different spaces are used for each other, do not affect each other, take into account the subtleties of life, to a large extent facilitate people's lives, reasonably separate washing and "convenience", so that the two do not interfere with each other, improve the quality of life, is the basic method of modern home decoration bathroom design.