Is it troublesome to change the toilet? The toilet at home is broken.

In fact, it is not troublesome to change the toilet, it is good to know a little common sense, specifically to disassemble the toilet first, close the triangle valve of the water tank - remove the hose - remove the silicone around the toilet - remove the screws on both sides of the toilet - lift the toilet. Then it is installation, clean the perimeter of the sewer pipe - put on the grease ring - align the toilet with the sewer outlet and lay it flat - fix the screws and tighten the screws - install the hose - open the triangle valve to water - the toilet is finished by playing silicone around the toilet.

First of all, please describe how bad the toilet is. The performance is:1

Keep leaking water into the urinal, 2The cracks in the lid of the water tank kept overflowing. 3.

If you don't have water at all, press it down and keep it empty, or the water will be stored very slowly! 4.The lanyard inside the old-fashioned tank knob is broken, press the empty one, there is water in the tank but it doesn't come out!

The modern button is stuck and can't be pressed!

Solution: In addition to Article 3, the water inlet switch of the water inlet pipeline of the water tank may be artificially turned off or the switch is blocked, move the switch!

Other open the lid of the water tank, pay attention to open it along the buckle, check:

The round rubber sealing cover from the outlet of the old water tank to the urinal is rotten or the cover is not in place, and it cannot play a sealing role (change the rubber sealing cover), such as the connecting lanyard is broken (same as Article 4).For example, the button of the new water tank against the water outlet sealing ring fails, and the sliding component that moves the sealing ring sometimes works, and the stuck is automatically recovered, and it is not possible to buy a component to replace it!

When the water is full, the float cannot float in time or float in place, but the inlet valve connected to it fails and cannot close the inlet water! When repairing, after draining the water, the components connected to the water inlet valve are moved, and it is not possible to remove them and replace them with a water inlet component! If the float connecting rod is rusty and broken, see if you can replace one, otherwise replace the entire assembly.

and 4, as above.

First, confirm that the triangle valve is open. Move the float (pontoon) in the water tank, see, if there is no water inlet to remove the hose connected to the triangle valve, see if the water inlet under the toilet is blocked, there is a conversion head with a net inside, and then there is only a change of water accessories in the toilet, the big problem is best to ask professionals to repair it, and generally sell toilets where there are maintenance masters.

Dismantle the toilet, take the phone out, reinstall it, if you can't take it out, you can only replace the toilet.

If the toilet is not a problem with the pipe, it is not easy to do, but the possibility of the pipe is not large, it is a thick straight pipe without a U-bend, and it is generally not blocked.

It's too troublesome to change it yourself, in fact, if you don't understand it very well, it's likely to get something about the drain pipe, it is recommended to find a professional to get it, and you want to change the toilet, you should have help install it when you buy it, you can ask more specifically, and strongly ask to confirm that the triangle valve is open first. Move the float (pontoon) in the water tank, see, if there is no water inlet to remove the hose connected to the triangle valve, see if the water inlet under the toilet is blocked, there is a conversion head with a net inside, and then there is only a change of water accessories in the toilet, the big problem is best to ask professionals to repair it, and generally sell toilets where there are maintenance masters.

Dismantle the toilet, take the phone out, reinstall it, if you can't take it out, you can only replace the toilet.

If the toilet is not a problem with the pipe, it is not easy to do, but the possibility of the pipe is not large, it is a thick straight pipe without a U-bend, and it is generally not blocked.

No trouble: dismantle the toilet: close the triangle valve of the water tank - remove the hose - remove the silicone around the toilet bowl - remove the screws on both sides of the toilet bowl - lift the toilet.

Installation: Clean the perimeter of the sewer pipe - put on the grease ring - align the toilet with the sewer and lay it flat - fasten the fixing screws - install the hose - open the triangle valve to water - play silicone around the toilet bowl.

Don't bother, go to the building materials market to buy a new one, the workers will help you dismantle the old one and put the new one, and it will be completed soon, and the new one will not be used for 24 hours, in order to dry the fixed glue, it can be used normally after 24 hours, and the personal experience will be adopted.

There is a small plug under the float, there should be a small thing such as sand and water alkali that has blocked that small eye, check it and clean it up. The cover on the toilet seat is generally not sold alone, unless there is a store that happens to have the same model of product damaged and cannot be sold, and the cover is just for you.

If you don't know how to change the toilet, it will definitely be troublesome.

Here are some things you need to pay attention to in the process of changing the toilet:

You have to look at the distance before knocking it off, only look at the shape and distance of the raised trap at the lower back of the toilet (some can).

As for the floor tiles, they do not have to be knocked off, usually the toilet is installed on top of the floor tiles. If the toilet was installed first and then tiled, the toilet should not be knocked out if it is below the floor tile surface. It can be flattened with a cutting machine, and the low-lying areas are repaired with cement.

You can also knock off a small part of the toilet bowl and replace it again).

Of course, due to the different shapes of the bottom of the toilet, there will be traces of the original bottom after installation.

Method 1 of changing the toilet seat:

Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 2 of changing the toilet seat:

When replacing the toilet seat, simply remove the fixing bolt on the rear of the toilet bowl to replace it; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

Method 3 of changing the toilet seat:

In addition to the above two methods, if your toilet seat is more complicated, such as a smart toilet seat, you can only seek a professional to help you change the toilet seat. Some workers who change toilet seats offer free replacements, but to use the products they provide, the slightly more expensive price of the products already includes their labor costs.

The toilet is broken, see where the problem is. If it's a squatting toilet, you can try to change the water tank, if it's a toilet water problem, you can try to change the water tank accessories (water inlet valve and drain valve), which is relatively simple and can be solved by yourself. If you change the whole toilet, it will be more troublesome, you have to remove the old one and then replace it with the new one, you can't do it yourself, you must first measure the pit distance to change the toilet, choose the pit spacing, and choose the right toilet according to the pit spacing.