What does balcony, kitchen size drop plate mean?

Updated on Balcony 2024-08-23
3 answers
  1. Anonymous users2024-01-24

    Usually, the balcony and kitchen of the building are based on the size of the appliance to solve the problem of reducing the elevation, so the beam elevation also needs to be reduced. Washrooms, kitchens, balconies and other areas that are prone to water accumulation should be lower than the elevation of the same floor.

  2. Anonymous users2024-01-23

    Enter the decoration exchange group, ah 104869753, there are many people to solve.

  3. Anonymous users2024-01-22

    The functions of each room in the building are different, and different floor decoration materials are used accordingly - stone, floor tiles, wooden floors, terrazzo, fine stone concrete, cement, etc. The thickness of various materials is different due to different construction practices, especially the waterproofing method of slope is the largest.

    For example, toilets, bathrooms, kitchens, etc., so that there is a difference in the height of the floor of the room with different materials. When the height difference is less than 30 mm, the thickness can be adjusted with a cushion. If the height difference is greater than 30 mm, the method of "lowering the plate" is adopted to reduce the elevation of the floor slab on the side with a larger thickness, so that the floor of different practices is basically flat after completion, so as to avoid too many small steps and small slopes to form obstacles, and bring inconvenience to users.

    Structural "falling slab" means "lowering the structural elevation of a floor or roof slab (slab surface)".

Related questions
2 answers2024-08-23

The balcony is 150 mm lower than the normal floor level.

The same is true for the rest of the balconies that are not marked. >>>More

2 answers2024-08-23

The bathroom should be waterproofed, so the general construction practice is thicker than the usual floor practice. Moreover, the floor of the bathroom is generally lower than the floor floor outside to prevent water from pouring out. These two aspects determine that the floor slab of the bathroom is lower than the outside, so the design should be lowered. >>>More

2 answers2024-08-23

The lower floor is the thickness of the ground between the upper and lower floors of the bathroom. The previous building was installed with squatting toilets, and its descending floor was mostly about 50 cm, and this descending floor included a backfill layer. Because the bathroom now does not need to be backfilled, the thickness of the descending floor is mostly about 25 cm. >>>More

3 answers2024-08-23

It should be a cutting board, and the utensils that are placed under the bottom when pounding, cutting, chopping, and smashing things are generally used in cooking. It is also called a "cutting board" or "cutting board" or "cutting board". >>>More

4 answers2024-08-23

It's the balcony outside the kitchen.