The waterproofing of the bathroom is not done well, is there any way not to knock off the tiles to r

The waterproofing of the bathroom is not done well, and the remedy is not knocked off the tiles:

Take down the sanitary ware, reinstall it, and pay attention to the connection with the sewer pipe must use auxiliary materials such as waterstops;

Remove the 3--5CM area around the floor drain and make a cement-based waterproof material.

Use chemical grouting to plug leaks, punch grout on the roof of your neighbor's bathroom, or grout in the tile joints of the bathroom;

Use colored tile grout to make it on the existing gap, and use cement-based waterproofing material or JS waterproofing material to do it in other places (nozzles).

Suggestion: If you need to rework, knock off the tile and redo the waterproofing is the safest.

1. Take it down in the sanitary ware, reinstall it, and pay attention to the connection with the sewer pipe must use auxiliary materials such as waterstops;

2. Remove the 3--5CM area around the floor drain to make a cement-based waterproof material.

3. Use chemical grouting to plug leaks, punch grout on the top of your neighbor's bathroom, or grout in the tile joints of the bathroom;

Fourth, use colored tile grout, do it on the existing gaps, and use cement-based waterproof materials or JS waterproof materials to do it in other places (nozzles).

Fifth, the materials can be bought in the construction market.

I know that there is a kind of plugging king used on the surface of the exterior wall tiles, and the bathroom is not clear. There is a special water leak on Taobao that does not ask for people, so it is recommended that you can inquire about it.

There's no better way to do this, because the waterproofing is done underneath the tiles. If you don't knock the tiles off, you can't do it again.

Remedy without knocking off the tiles is unlikely.

Look with the plugging king brush in the tile joint. I don't know if it's useful.

Unless you sacrifice the clear height of the bathroom...