Household flush toilets do not flush without floats

The old toilet tank does not come out of the water is not the fault of the float, the float only plays the function of controlling the water inlet of the water tank and terminating the water intake, you said that the water does not come out when you press the button, and the water comes out only when you pick up the cover, which is the reason why the connection cable between the button and the drain of the toilet tank has some length. >>>More

<> it's pretty much the same as this structure! In fact, the green one is still a float valve, you try to use a screwdriver to twist the white Phillips screw, so that the green float in the middle of the ball drops a little to increase the buoyancy and shut down the water inlet, it may be this problem!

Find a longer stretch of plastic water pipe, connect one end to the tap water, plug the other end into the toilet mouth, then plug the toilet mouth with something like rags, and then turn the tap water over, which will use the water pressure to unclog the pipe.

Generally normal, after flushing, the water tank is added with water, it is not moved by pressing the button, and when the water is added to a certain extent, it is normal, if it is not successful, it is the float is broken or the button position is wrong.

Hello dear, you can directly put the toilet cleaner into the toilet tank without floats, which can achieve better use results. In order to prolong the use time, because the toilet cleaner protective film dissolves when it comes to water, take out the toilet cleaner and keep the protective film away from the water outlet, and the toilet cleaner will slowly dissolve in the water. If it is the first time to use it, it will need to sit in the tank for at least 10 minutes, so please do not tear off the outer protective film and place it under the tank float. >>>More