-
Anonymous users2024-01-24<> it's pretty much the same as this structure! In fact, the green one is still a float valve, you try to use a screwdriver to twist the white Phillips screw, so that the green float in the middle of the ball drops a little to increase the buoyancy and shut down the water inlet, it may be this problem!
How to adjust the toilet float - situation 1: If you want to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover and have 1 thin leather pipe called the water supply pipe, which is generally inserted into the drainage valve on the right, and pull the right side up directly in the water tank, so that the water in the pit will not be too high when the water enters the water next time. >>>More
It is to rely on the buoyancy of the ball to close the water inlet valve of the toilet, when the water in the toilet rises to a certain position, the buoyancy of the water rises the ball, the water inlet valve connected to the ball is closed, when the water level drops, the ball falls down, and the water inlet valve connected to the ball is opened, so that the water enters the toilet.
The bottom blue one is the float, and there is a white dot in the upper right corner of the float. >>>More
The float and the piston of the toilet are not connected together, the float is used to control the water intake, and the piston is used to drain the water, so the piston must be connected to the drain button on the outside of the toilet tank to function.
It must be in the upper middle position, huh? The float is mainly used to control the height of the water consumption of the water tank.