-
Anonymous users2024-01-24It shouldn't be the hose, it's possible that the overflow valve of the toilet is not properly adjusted.
-
Anonymous users2024-01-23The toilet simply says that there are two control valves, one is the water inlet, the other is the water, the one that enters the water is connected to the hose faucet, and the one that comes out of the water is to control the flushing of the toilet, you see the toilet sitting under the toilet in the running water that is the control valve of the water is broken, and the water inlet control valve has nothing to do with it, you can buy one for twenty or thirty yuan in the hardware store to replace it yourself, master the skills when you replace it, you remove the hose, and the end of the hose is newly installed, and the hose does not leak at both ends. Hope it helps!
Look at the floats, sometimes they get stuck. The quality is not good. If it doesn't work, change it.
It has nothing to do with the float, the flowing water that can be seen generally flows out of the tank, and the float is in charge of the water entering the tank, the float valve. It is the leakage caused by the lack of tight sealing of the water outlet corresponding to the middle half red and half blue press the water outlet switch, you can close the corner valve at the back of the toilet tank, empty the water tank, clean it up, and the inside is dirty.
The toilet sluice is closed, and it can't be opened when it's in use.
I am the toilet after-sales, depending on the reason you said, it should be that the outlet valve is broken, the water can not be sealed, the general hardware store has sold, about 10 yuan, to the boss to change it for you. Negotiate a good price first. And it doesn't matter if you give water.
When the toilet is leaking, you can check first:
1. Whether the black semi-circular float on the overboard assembly is properly covered, or the black semi-circular float falls off, or the rope is stuck. >>>More