-
Anonymous users2024-01-24This problem you react to is not a minority, because the national standard for all toilets sold in China, the size of the water cover is stipulated, I have a little suggestion here, the toilet tank lid can be opened directly, in the downpipe (there are 2 devices in the water tank, one is the water inlet, one is the water dropper) The pipe should be connected with a very thin plastic or rubber pipe, this is the water supply pipe, it is the water cover, you pull out the pipe, let it hang in the water tank. Or there is a more embarrassing way, usually use a basin to catch water on the basin faucet, when you want to get a large one, pour the half basin of water into the toilet bowl (not the water tank), so that the water on the cover of the water will be taken away by the siphon cover effect, so that it will definitely not splash the buttocks.
If you are too troublesome, you can only throw 2 pieces of straw paper (hard straw) on the water cover every time you go to the toilet.
-
Anonymous users2024-01-23Now put a layer of paper on the water surface in the toilet... When it falls like this. Xiang is buffered.
It can be made of waterproof polypropylene, the bottom is all done, the wall can be made of meters high, and the closed water test is done well, and the bricks are paved without water seepage.
Putting paper: After testing, I don't think it's very useful - because if you put one or two sheets, you will be soaked immediately, and even if you have paper, there is still a high chance of splashing. Put a lot of words. I think it's a waste. >>>More
If you sit on the front half of the toilet, you won't be splashing water directly in the toilet.
If the water level is too high, see if the pipe of the inlet rod in the tank is plugged into the overflow pipe for the outlet. If you have one, pull it out.
Put a piece of paper in the water inside the toilet!