-
Anonymous users2024-01-24The water level of the toilet is designed to prevent odor, and there is a U-shaped bend inside the toilet, which is used to store water. When the normal toilet flushes, it will respond to the suction effect of the flush, and the water level will be very low, which cannot meet the purpose of preventing odor. All toilets also have a water replenishment device, which will fill the toilet bowl with a small amount of water after flushing to achieve the purpose of raising the liquid level.
There can be two reasons for the situation you are talking about, one is that the toilet U-bend is leaking, and the other is that the water replenishment device is broken.
-
Anonymous users2024-01-23My situation is the same as yours, rush more, the following must be blocked, mine is a lot more rush to get through.
Check whether the water replenishment hose is plugged in, the water replenishment pipe is a hose that extends out separately from the water valve, generally the hose will be inserted in the overflow hole of the flush valve when leaving the factory, it is to prevent the toilet from storing less water, and the supermarket that can't be flushed clean and scale when the sewage is not too much, my home is mighty, wait for a few minutes after spraying, and brush with a brush.
There is a float in each automatic flushing toilet, as the water level in the toilet rises, the buoyancy generated by the float is getting bigger and bigger, when the water level rises to a predetermined value, the buoyancy generated by the float will be transmitted to the switch through a seesaw structure, the switch is closed and then the water inlet valve will not enter the water, when the water is released, the button or wrench pulls the plug of the water discharge, and the plug is automatically pulled out. After the water is discharged, the plug automatically returns to its position under the action of the spring and enters the next round of water filling cycle.
Sometimes the toilet is clogged, but it is not very serious. >>>More
This is very good, a little water can be sealed, and there is that sound of explanation, which is very smooth.
There are many reasons for this, such as water pressure problems, switch problems, etc. Or ask a specialist to check it. Take care of it.