The edge strip on the solid wood floor just laid yesterday was crooked, and today I found out that t

With a wallpaper knife you can clean the glass glue. It is recommended to wait for another two days for the glass glue to dry and clear.

You can slightly increase the gap in the floor to ensure that the door strip can be covered and straight.

This must be caused by the construction of the store during transportation, but the problem is not big, find the store to repair, a good paint repair master can be repaired without color difference,

You can usually use a vacuum cleaner or broom to clean the dust on the surface of the solid wood floor, and then wipe the surface of the solid wood floor with a rag or mop that is soaked and wrung out until it does not drip water. After mopping the floor, it is best to open the doors and windows to allow air circulation, dry the solid wood wood floor as soon as possible, and keep the solid wood wood floor dry and clean.

Many woods can deform or crack in the natural environment or under drying conditions. Cracked wood made of floor affects its quality grade, but sometimes due to improper control of the drying process, it will cause internal cracks, forming hidden defects, which will be gradually revealed during use, generally speaking, the bottom environmental humidity in contact with the floor will be slightly higher than the floor itself, so the floor moisture absorption and expansion cause mutual extrusion to cause cracking, and some cracking is related to the wood fiber of the material itself, which is difficult to avoid. If a large number of floors have large-scale cracks, it may be related to the processing technology, and the manufacturer should be contacted to solve the problem. >>>More