How to construct a home improvement ceiling

Wooden keel ceiling: use an electric drill to drill the hole under the wood suspension bar to make a wooden keel frame, and then nail the nail nail paper gypsum board.

Light steel keel: first thread the boom, then use the pendant to install the main keel and auxiliary keel of the light steel keel, and finally use screws to nail the gypsum board to the keel.

Surface treatment: After the ceiling carpentry is finished, all the gaps are glued firmly with seam tape, and then all the screw holes are smoothed with cement, and then the putty is scraped with white powder, and finally the latex paint is finished.

First of all, play the top horizontal line, 30 * 40 or 25 * 30 fir keel 300 * 300 (400 * 400) empty wooden shelf, after the installation of the wooden keel, choose a good quality five splint or nine splint full paving base, and then on the large board of gypsum board, gypsum board combined to leave about 10mm seam, with special screws to install, note, gypsum board and splint between the milky white glue to do bonding.

Generally, the living room is decorated directly on the floor, so many decorative means of the wall are suitable for the ceiling. In order to achieve decorative effects and set off the atmosphere, some families need to make suspended ceilings in the living room in order to insulate and cool down, or to cover up the shortcomings of the original roof. In order to prevent steam from invading the ceiling, reduce the space, facilitate heat preservation, and conceal the upper and lower water pipes, the bathroom must be treated with moisture.

Acceptance method. 1. The variety, specification, color, base structure and fixing method of the materials used in the ceiling project should be in accordance with the design, the requirements of the residents, and meet the current standards.

2. The ceiling keel shall not be twisted or deformed, and the installed ceiling keel shall be firm and reliable, and the allowable deviation of the surrounding level shall be 5mm.

3. Light lamps and lanterns can be hung on the main keel, and lamps or ceiling fans weighing more than 3kg shall not be connected with the ceiling keel, and shall be hooked separately.

4. The ceiling cover panel and the keel should be tightly connected, the surface should be smooth, there should be no pollution, cracking, missing edges, falling corners, hammer wounds and other defects, the joints should be consistent, the pressure strip should be straight, no warping, and the junction between the cover panel and the wall, curtain box, lamps and lanterns should be tight.

5. The gypsum panel on the paper surface is generally fixed on the keel with galvanized screws, and the nail head should be coated with anti-rust paint. The pasted cover shall not be delaminated, and the shelved cover panel shall not be leaking, penetrating or warping.

Wooden keel frame, gypsum board base, and then painted latex paint.