-
Anonymous users2024-01-24As long as the heating is not blocked above and below, the general problem is not big, and the heat is more from the bottom to the top
The installation of radiators at home can be selected after the decoration is completed, and at the same time as the installation of water and electricity lines. The location of the radiator installation varies according to the room with different functions, and when determining the location of the radiator, it is necessary to consider both the problem of convection and the problem of heating cold air. >>>More
1. The valve is not opened.
If you encounter a radiator situation at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close. >>>More
You check that the valves of the water separator and water return are fully open. In the past, it could be hot.
Plumbing? If the heating is not hot as a whole, it may be that the water is entering or the return valve is not open. If the heating in a single room is not hot, it may be caused by the radiator's nest and not deflated before use. >>>More
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.