-
Anonymous users2024-01-241. If there is no decoration, then bury the network cable, at least a gigabit network cable. To lay the pipe, in order to prevent accidents, take two lines at the same time.
2. If the decoration has been completed and it is not easy to walk the line. Then consider wireless networks. Since it is to transmit images, consider a 300M wireless network.
3. If the TV does not support adding a wireless network card directly, then spend an extra amount of money. Two wireless routers are required, one in the study and one in the living room, and the living room router can be connected to the TV.
-
Anonymous users2024-01-23CCTV cables are installed, not suitable for decoration before the modification on the line, if the film and television wall-mounted TV, then first lay the line pipe, the general height on the sofa to look suitable, there is no standard.
-
Anonymous users2024-01-22Generally, the developer has laid out the wire, and it is all pierced holes.
1. Dual-control switch connection.
A flathead screwdriver opens the panel and cover of the switch, inserts the wire head into the wiring hole, and connects the two contacts of the two SPDT switches. Then the knives of the two switches are connected to the two ends of the light as the two ends of all the switches. In this way, when the knives of switch 1 and 2 are connected to their respective contact 1 or hit contact 2 together, the circuit is turned on, and the light is on; If the circuit is not working, the light will be turned off. >>>More
Meter double-ended power cord, meter audio cable, meter dual-frequency signal cable, 4-meter spring data cable, service lamp, etc., in fact, there are many manufacturers specializing in making this kind of bed or furniture can provide customization.
At least five speaker cable outlets, one subwoofer signal cable exit, and one HDMI cable exit. If it is currently popular, then it is relatively necessary to increase exports!
You can refer to Chengdu's "Huangchao Design", their company specializes in indoor and outdoor pure design! It will definitely make you satisfied, because our house is designed by them, and it feels very good, help them advertise, hehe!
Family living room audio decoration wiring steps:
1.Reserve a long enough cable as much as possible, this is because in the family living room audio decoration wiring, many families often encounter the situation that the reserved wire is shorter when the final installation of the audio and amplifier is completed. The installation height of the surround speaker should be about 60-90cm higher than the height ratio of the human ear when the listener is sitting in the chair. >>>More