-
Anonymous users2024-01-241.Measure the width of the sofa first. Measure the length of the backrest from the front legs and cushions + the length of the backrest behind + the width required to tuck into the cushion.
2.Measure the length of the sofa again: measure the length of the armrests (from the ground on the outside of the armrests to the inside of the cushion) *2 + the length of the middle cushion + the width required to tuck into the cushion. Some brands, such as left and right sofas, can also be customized, which is very suitable for young people.
3.Spread the appropriate length of cloth on the sofa. Generally, the cloth required for a single sofa is about:
Length 230cm, width 235cm; The cloth hail required for the two-seater sofa is about: 300cm long and 235cm wide; The cloth required for the three-seater sofa is about 470 cm long and 35 cm wide.
4.According to the shape of the sofa, the cloth stopper is served into the seat seam, and at this time, stationery clips or long rulers, plastic pipes, etc. can be stuffed into the chair seams to play a fixed role and prevent sliding loose.
5.Straighten the fabric at the back of the chair and the armrests and fix it with pins.
6.Bow or other ornaments can be pinned to the pins to add beauty.
-
Anonymous users2024-01-23Any factory can make camouflage sofa fabrics.
If there are any other requirements, you can ask a little more carefully.
Prepare a large piece of non-woven ballasting cloth, spread it flat on the sofa, fix the non-woven fabric with a pin, and then mark the cutting line on it with a pencil; Cut it with scissors where the cutting line is marked; Prepare a long strip of red cloth and a thicker rope, wrap the rope with a strip of cloth, and then sew it up, wrap the rope tightly and sew it again; The red dotted fabric and lace are sewn together, and the rope wrapped in the red cloth is the position of the edge of the sofa; Sew the cut non-woven fabric and the sewn lace dot fabric together, and cut some small lace at the corner to beautify it; In this way, the side of the sofa cover is completed, and the other side, front and back can be completed with the above steps. Remember where you sew with the fabric that has been sewn lace, the lace does not need to be repeated; Sew each part together, so that the prototype of the fabric sofa cover comes out; At the end, you can decorate it with a wrinkled lace strip of red cloth that is left behind.
In fact, when we choose what kind of sofa cover fabric, on the one hand, we consider the material of the sofa cover fabric, mainly to see the comfort and practicality of these sofa cover fabrics. However, on the other hand, the material of the sofa cover fabric also has a good effect on the decoration of the room. The first thing we know about is the cotton sofa cover fabric. >>>More
Home decoration has strict requirements for the selection of household items, especially with color supplies, which is likely to have an impact on the overall decoration. For the living room, the most obvious color area is the sofa, and we must pay attention to the overall decoration style when choosing the sofa cover. There are many factors to consider before choosing, such as the color of the floor, the color of the wall, etc., and the choice should be made through these colors. >>>More
3. All the most primitive and practical sofa cover measurement methods: >>>More
Sofa cover making tips.
First, with the most stupid method, divided into parts to make, the backrest, cushion, and the back are separate, not only convenient for the disassembly of the set, but also easy to clean, the two parts need to be connected where the woolen zipper is used, also called hook and loop. >>>More