How to DIY homemade sofa covers

Prepare a large piece of non-woven ballasting cloth, spread it flat on the sofa, fix the non-woven fabric with a pin, and then mark the cutting line on it with a pencil; Cut it with scissors where the cutting line is marked; Prepare a long strip of red cloth and a thicker rope, wrap the rope with a strip of cloth, and then sew it up, wrap the rope tightly and sew it again; The red dotted fabric and lace are sewn together, and the rope wrapped in the red cloth is the position of the edge of the sofa; Sew the cut non-woven fabric and the sewn lace dot fabric together, and cut some small lace at the corner to beautify it; In this way, the side of the sofa cover is completed, and the other side, front and back can be completed with the above steps. Remember where you sew with the fabric that has been sewn lace, the lace does not need to be repeated; Sew each part together, so that the prototype of the fabric sofa cover comes out; At the end, you can decorate it with a wrinkled lace strip of red cloth that is left behind.

Many customers want to make a cloth cover when the sofa at home is broken and they don't want to change it for the time being, or they are afraid that the sofa will be dirty. For more complex sofa styles, you will definitely be able to make a satisfactory sofa outerwear that meets your requirements. But there are some simple ideas for saving customers, and here's how to make your own sofa covers

Step 1: Spread the cloth flat on the largest side of your sofa and cut it (note: it must be cut a little bigger, otherwise, it will not be "worn" when it is done).

Step 2: Cut the side part of the sofa. Notes:

Same as above, slightly larger (if inexperienced, it's better to leave more leeway, if experienced, you can leave less). Step 3: Sew together the two pieces of cloth 1 and 2, pay attention to:

The "dead corner" of the sofa should be sewn tighter, otherwise it will not be beautiful. Step 4: Spread the white cloth on the side and cut it in the same way as above.

Description: 1. What I do is a separate sofa cover, if you want to connect it together, you can omit this step. 2. I am made of white cloth, but after I finish it, I find that people often move when sitting on the sofa, so sometimes it will be exposed, which is not beautiful.

Step 5: Sew the white side cloth together with the two pieces just now, this step is more difficult, it is recommended that you mark each corner with scratch powder when you do it, so that you will not make a mistake. Step 6:

Stitch the white side cloth well, note: the 90-degree place of the sofa sewn by two white side cloths is better to be slightly tighter, so that it is beautiful. Step 7:

After following the steps above, the front and sides of the sofa are completed, and the back part is made of white cloth (because the back is next to the wall, so the cheapest cloth can be used). I won't talk about the method, it's all the same as before. Description:

1. Beginners can only make the front and back of the one-piece sofa cover, and it is best to do the one-piece sofa cover after doing the one-piece one, which will be easier.

You can go to the ruler, scissors, and cloth to learn.