What to do if the toilet floor is leaking

This problem must be caused by the failure to do a good job of waterproofing the bathroom in the renovation process of your home, and there may not be obvious water leakage, mainly caused by bathing and standing water for many years.

The solution is to find a decoration company to decorate you, knock off all the bathroom tiles, and redo the waterproofing. Then do a water storage experiment. Make sure there is no leakage before tiling.

Two reasons, one is that the waterproof layer is broken, the other is that there is a problem with the pipe, the best way is to say above, it is best to knock them all out, dig the bottom plate from the new waterproof, you must be careful when doing it, and don't have any problems.

The waterproofing of the toilet is broken, so let's redo the waterproofing.

If you find that the toilet floor is leaking, you need to take measures as soon as possible, because a prolonged leak can cause damage to the floor and the structure of the house. Here are a few ways to fix a leaky toilet floor:

1.Check for the source of the water leak. The first thing you need to do is identify the source of the leak, which could be caused by a ruptured gasket at the bottom of the toilet or a ruptured water pipe or sewer.

If the gasket at the bottom of the toilet is broken, you can replace it with a new gasket to fix the problem. If it's caused by a broken water pipe or sewer, you'll need to have it repaired by a professional plumber.

2.Turn off water sources. If the leak cannot be repaired immediately, the water source can be turned off to prevent the leak from becoming more serious. During the water outage, attention needs to be paid to the need for sanitation and domestic water.

3.Clear the ground. If there is already sewage, it needs to be cleaned up immediately, as prolonged wetting can cause bacteria to multiply and affect household hygiene.

4.Replace the floor. If the leak is severe, the floor has been damaged and a new one needs to be replaced. Also look for moisture underneath the floor and remove it if necessary.

5.Prevent secondary water leakage. After replacing the floor, it is necessary to use a more robust gasket at the bottom of the toilet bowl and the connection of the water pipe, etc., to avoid secondary water leakage.

In short, finding a leak in the toilet floor requires timely measures to solve it so as not to affect household hygiene and structural safety. At the same time, it is also necessary to pay attention to hygiene and maintenance to reduce the occurrence of water leakage.