-
I can tell you that the loss rate of the floor is about 3%, and you can remove the area of a single piece of floor from the floor area, and the number will be closer.
48* square meters, veneer square meters;
It is necessary to use a piece of floor or so, and the error will not be very large.
If you want to be very precise and difficult to get numbers, you need to provide the length and width of the customer. And the number of pieces of floor used is limited by the construction method of workers and the requirements of joints.
-
To be precise, you also need to know how many meters the length and width of the room are, and whether the floor is paved in a straight or horizontal direction. If you have it, your floor is not imitation of solid wood, you need to install it on the joint, if you need it, then the loss is relatively more.
-
425 blocks.
48* longboard generally takes 6% of the loss, if the room type is irregular, take about 10%. )
-
I can tell you that the leakage rate of the floor is about 3%, and you can remove the area of a single piece of floor from the floor area, and the number will be relatively close.
48* square meters, veneer square meters;
The cover wheel needs to be about the floor with a piece, and the error will not be very large.
If you want to be very precise and difficult to get numbers, you need to provide the length and width of the customer. And the number of pieces used such as the floor is limited by the construction techniques of workers and the requirements of the joints.
zdsjwy2, hello :
The width is: 1 dm m. >>>More
48 (block.)
Hello: 1 dm = m.
48 (block). >>>More
2 dm = m.
48 (block for adoption.) >>>More
1 dm = m.
48 blocks. >>>More