-
Anonymous users2024-01-24Several situations and repairs of a leaky faucet.
1. Water leakage at the connection between the faucet and the water inlet pipe. This phenomenon is generally caused by the rubber ring of the inlet pipe mouth is not installed or deformed, the solution is to unscrew out the hose, if the rubber ring is not deformed, the water inlet pipe can be re-installed, if the rubber ring is found to be deformed, then replace the rubber ring.
2. The faucet is still leaking after it is closed.
I found it here. You see if it works.
-
Anonymous users2024-01-23The weld can not be handled, and the faucet can only be replaced with a new one.
-
Anonymous users2024-01-22It must be the kind of outlet pipe that can be turned long, right? There's nothing you can do about that kind of breakage. But where to buy it, where to go and get a new one. As long as the warranty period is not exceeded. I will definitely give you a free one.
-
Anonymous users2024-01-21After cutting off the water source, continue to re-weld. If it really doesn't work, change it.
-
Anonymous users2024-01-20Find a plumber to take a look, it's better not to get it if you don't understand.
1. Water leakage at the water outlet: The kitchen faucet leaks, and the water leakage at the water outlet is caused by the wear of the shaft gasket in the faucet. Solution to a leak at the outlet: >>>More
The part of 3 in the figure is a screw rod downwards to put a rubber ring (to play a sealing role to prevent downward leakage), and then through the basin, there is a nylon lock nut from below to tighten, play a fixed role! You first check if the rubber ring doesn't work, and then check if there is a dew point in the screw part (some brand faucets are made of recycled materials, and the service life will not be very long)!
1 Water leakage at the water outlet.
Kitchen faucet leakage, encountering a water outlet leak, is caused by the wear of the axial gasket inside the faucet. The solution to the leakage of the water outlet: use pliers to loosen the gland and remove it, take out the axial gasket with a clip, and replace it with a new axial gasket. >>>More
The nut below is easy to loosen, loose is easy to leak, tighten it, if not, change the leather gasket. >>>More
Change a new faucet, it should be the valve core rubber mat is aging, if you have strong hands-on ability, you can go to the same valve core and replace it, but this is likely to still have problems! So it is advisable to replace the whole faucet!