Why do you use a braided pipe instead of a bellows for the toilet inlet pipe, is it because you want

Updated on Toilet 2024-08-06
4 answers
  1. Anonymous users2024-01-24

    Braided pipes are only metallic on the outside and organic materials such as rubber on the inside, while bellows are all-metal. The toilet is filled with ordinary cold water, and the braided pipe is enough, and the braided pipe is relatively soft and easy to bend.

  2. Anonymous users2024-01-23

    Because braided pipes are more durable and easy to install.

  3. Anonymous users2024-01-22

    No pressurization is required.

  4. Anonymous users2024-01-21

    The braided pipe is metal only on the outside, and the organic material such as rubber on the inside, while the bellows are all metal. The toilet is filled with ordinary cold water, and the braided pipe is enough, and the braided pipe is relatively soft and easy to bend.

Related questions
1 answers2024-08-06

The last thing that goes through the inlet pipe is the water in a water pipe, especially the bathroom. When washing clothes, the faucet, water heater, and water flow will be smaller.

2 answers2024-08-06

Look at the number of points reserved at home, generally speaking, 4 points are the most. If there is a mismatch with 6 points, the general situation is that you need to change the pipe, I hope it can help you!

3 answers2024-08-06

This is the process of "filling" the toilet with water.

When it doesn't sound, it's full of self-shut-off). >>>More

1 answers2024-08-06

The hard pipe connection should be broken or loose in the gasket in the Som, close the angle valve with a wrench to the clockwise direction to tighten the valve to see the effect, if you can not repair the closed valve, you can open the Som to replace the gasket, the hose connection directly purchase the hose to replace the new one.

1 answers2024-08-06

Is it an electric water heater? This may be the failure of the check valve in the safety check valve of the water inlet, remove it and check it.