Do you want to make a hole in the tile wall between the kitchens and use a tile drill to pierce the

Updated on Kitchen 2024-08-30
4 answers
  1. Anonymous users2024-01-24

    They use a percussion drill bit, because the strength of your tile is limited, there is no need to use a special hole opener, if it is a strong and dense polished brick, it is generally necessary to use a hand drill with a glass hole opener to open the hole, and then use the impact drill bit to drill holes.

  2. Anonymous users2024-01-23

    Yunnan Tongtai building materials teach you how to punch holes in the pasted tiles?

    Paste the tile in the case of not knowing whether the tile is hollow behind the case, punch holes in the top of the installation, if you are not careful, you will definitely crack the new tile on the wall, if you have to do it yourself, you must have the necessary power tools, electric hammer, electric drill also need to use some other special tools.

    2. After positioning the place to be punched, mark it with an oil pen, pencil, etc., and then use a hollow tubular diamond drill bit to punch the tile through, remember; This hole must be larger than the actual hole to be used. For example, the actual hole diameter is 6mm, and the hole through the tile with a hollow tubular diamond drill bit should be 8mm.

    3. Use a hollow tubular diamond drill bit to add water to the tile while beating, and then use an electric hammer to punch the hole according to the size of the required hole diameter. This hollow tubular diamond drill bit (also known as glass drill bit).

  3. Anonymous users2024-01-22

    Hello, they use a percussion drill, in fact, this method does not guarantee that the tiles will crack.

    If you want the tiles not to crack, you should use your method! Drill with a porcelain drill first, and then use a percussion drill to perforate, so that the quality of the hole is very good.

  4. Anonymous users2024-01-21

    No matter what drill bit you use, as long as you don't crack and break the tiles. You want results, don't worry about the construction process.

Related questions
Install partitions on the tiled walls of the kitchen
1 answers2024-08-30

Yes, no problem.

Try not to punch at the corners of the bricks when punching the holes, where it is easy to be empty. >>>More

What is it that there are cracks in the tiled walls and tiles on the kitchen wall
2 answers2024-08-30

There is a problem with the quality of the tiles, if the quality is good, it is possible that the kitchen is less dry and cracked without water, and my company's kitchen is also like this, and it will be okay if there are people for a long time, which is also the construction worker explained that I listened.

Is it good to use a drill to punch holes in the tile wall between the kitchens? Guaranteed not to ro
9 answers2024-08-30

You need to use an adjustable impact drill to adjust to a gear without impact, otherwise the tile will crack, and the pistol drill is also OK. The drill bit should not be used for percussion drills, but for glass openings, which are triangular than the tip of punching drills. Make a mark on the tile first with a steel nail to knock a small point, so that the drill bit will not run around, hit the time slowly, break, penetrate the tile and then speed up, so that the hole will be very good.

How do you clean chicken essence on the tiles in the kitchen?
1 answers2024-08-30

Essence of chicken has almost no adhesion, and the essence of chicken is melted on the tiles between the kitchens and wiped clean directly with a damp rag. If there is a smell or the like, you can spray the kitchen agent and wipe it clean with a mop.

Please ask the home improvement master to use the broken tiles to make the base layer when laying th
2 answers2024-08-30

Using old tiles as the base layer has a great disadvantage - the base is not dense and easy to hollow, so it is recommended not to use it, and it is best to use sand and ash.