-
If it is a heavy crystal lamp, the prefabricated board is marked with expansion screws, and then it can be but in the ordinary family living room, when installing the keel, the position of the chandelier, lay a woodworking board and then lay gypsum board.
Playing the fixed left and right, the woodworking board is enough to withstand this weight.
The general construction process is like this.
-
The ceiling lamp is not heavy, you don't have to take so much painstaking effort to fix it on the top, just dig a hole in the gypsum board and add a woodworking board on it, and install the ceiling lamp on the plaster.
It is best to use two expansion screws.
The bolt is 120*8, and the steel plate drilling screw is fixed and connected, so that the safety factor is higher. >>>More
Ceiling lamps are relatively lightweight. Wooden screws (coarse) can be used directly. Drywall strength is enough.
First: choose a load-bearing wall, it is best not to choose a wooden wall. >>>More
How to install ceiling lights in the living room.
1) When installing the ceiling lamp in the living room in the masonry structure, embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs; Do not use wooden wedges. And the bearing capacity of the above fixings should match the weight of the ceiling lamp in the living room. To ensure that the ceiling light in the living room is fixed firmly, reliably, and can extend its service life. >>>More
How to install ceiling lights in the living room.
1) When installing the ceiling lamp in the living room in the masonry structure, embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs; Do not use wooden wedges. And the bearing capacity of the above fixings should match the weight of the ceiling lamp in the living room. To ensure that the ceiling light in the living room is fixed firmly, reliably, and can extend its service life. >>>More