The hot water pipes in the kitchen and bathroom are not working, and there is hot water in the kitch

Updated on Kitchen 2024-08-06
2 answers
  1. Anonymous users2024-01-24

    It usually doesn't freeze. Even if it freezes, the kitchen hose is frozen, and the kitchen is generally on the north side of the living room. The bathroom is generally far away from the north window. It depends on whether there is no water at all, or whether it is cold water instead of hot water, and whether the water flow is normal.

    It may be a problem with the pipeline itself. Or it is caused by insufficient water pressure.

    If it is a PPR hot melt pipe, if the hot melt joint is too deep, the inner wall of the pipe will be narrow. The water pressure is not enough to ignite the water heater. Therefore, only cold water is produced, and the flow rate of cut water is small, and hot water is not produced.

  2. Anonymous users2024-01-23

    The water pipe can produce water, not a frozen problem, the bathroom has hot water at the beginning, it is first used in the kitchen, and there is unused hot water in the pipe, indicating that the water heater is working normally.

    The main problem is that the water pressure is not enough, but the water pressure involves the speed and flow of the water flow, and when the water heater is designed, there is a certain safety factor, that is, the amount of water output per minute, if it does not meet the standard, the water heater will not start to work. It is estimated that when you are using water in the kitchen, the switch angle is large, and the flow of water is large, so the water heater works, while you are in the bathroom, the switch angle becomes smaller, and the water heater does not work.

    Generally used in winter, the function switch on your water heater has been set in winter, the flow rate will be reduced, if you are reducing the water flow in the bathroom, the water heater will not work, and the hot water will not be produced.

    If you turn on the switch on the water pipe to the maximum, if the water flow is large, there will be hot water, if the water flow is small, not as large as the flow of the kitchen, it is the water pipe and other problems.

Related questions
7 answers2024-08-06

The installation quality is poor, and the problem can be more serious and complex than you think. >>>More

2 answers2024-08-06

There is central hot water provided upstairs where I live, but the price is more expensive, and some families still install their own water heaters. As for whether your community provides 24-hour hot water, you have to ask the property! Even if there is such a service, it is up to you whether you use it or not. >>>More

6 answers2024-08-06

When the water heater is not in use, there is still water in the hot water pipe, but it is cold water.

6 answers2024-08-06

Answer: Dear, your question will be answered by me, I am sorting out the answers you need, please wait a while, about five minutes, you can add the question description during this time. >>>More

5 answers2024-08-06

I think you first find the cause of the water leakage, and then deal with it, the main thing is that it was not done well at the beginning, the quality is not good, see if the leakage is not good, if it is not too serious, make up for it If the water leakage is serious, you have to overhaul it, all the pipes and tees, otherwise what can be done, do you think what I said is right, tell me your opinion, thank you.