-
Anonymous users2024-01-24When the water heater is not in use, there is still water in the hot water pipe, but it is cold water.
-
Anonymous users2024-01-23It can't be without water.
When the electric water heater is not in use, there is water in the hot water pipe.
It's just that at the same time, the water pressure is a problem.
-
Anonymous users2024-01-22As long as it's not connected to the top of the shower faucet, there must be water in the kitchen.
When the electric water heater is not in use, there is only a small amount of residual water in the hot water pipe.
-
Anonymous users2024-01-21It does not affect, it is directly connected to the water heater, it can be used separately, and the hot water pipe has room temperature water.
-
Anonymous users2024-01-20As long as the power supply of the electric water heater is not cut off and there is water circulating in the water heater, the electric water heater will work automatically, and hot water will flow out of the water outlet.
-
Anonymous users2024-01-19It depends on how you connected it, in parallel or in series?
There are relevant standards, and the distance between the two needs to be 10-15 cm or more. >>>More
But mine is a new house, the hot water in the basin and vegetable basin are normal, but the hot water in the shower is very small, and the water heater can't be turned on. What is the reason for this? Was it because there was no inspection when the water and electricity were changed at that time?
The way to teach you is to first close the main sluice gate of the water, and then use a pistol to drill into the rigid structure inside, or use a just saw to dig it slowly, and wait until it is almost time to smash it with a change cone, and smash the inside down, we have done this. Give it a try.
You check the interface inside the wall of the hot and cold water pipes to see if there is a leak.
If the tile cracks, another reason: artificial, water absorption There are two reasons There is no other exclusion of artificial, that is, the cracking caused by the water absorption of the tile, the general tile surface is made of porcelain will not absorb water, and the water vapor will only penetrate through the joints between the bricks and bricks, and the probability of cracks in the bricks of a few dollars is the largest, because the soil used when it is fired will not have this problem.