How to deal with the tiles around the bathroom floor drain

1. Raw room decoration, in addition to waterproofing must be done, when sticking to the ground tiles, we must pay attention to reserving a certain slope, the slope is too large to affect the installation of sanitary ware such as toilets, the slope is too small and can not play a role, this just right slope depends on the experienced bricklayer master to grasp; If the slope is reversed, the consequences will be serious, and the water will flow backwards.

2. In addition to the slope to ensure that the water flows to the floor drain, the paving treatment of the tile treatment at the floor drain is also very important (especially when the bathroom chooses a larger floor tile and the floor drain is not in line with the brick joint); For this point, the general master is like this: cut the tile into four parts, so that the four sides of the tile next to the floor drain are the lowest, so as to achieve the purpose of not storing water.

Nowadays, this is generally done so that the water flows smoothly from all angles. The slope should not be too big, it will make people feel unstable under their feet, but the water is fast and clean. The slope should not be too small, too small and the water flow will not be smooth.

Generally, the master looks at the slope from the top of the level, and after the completion of the ground is completely dry, he will try it, if the effect is good, otherwise he will do it again. Do this when there is enough space, otherwise you will have to open a square in the middle.

A particularly practical and good method, one must be well designed, and the other work should be fine. Best.

That is true.

And the slope is a little bigger. The water is fast.

It's not like that, it's a matter of workmanship.

It should be slotted in the ground.